Lucent Technologies 5 manual Revising Allowed Lists, Task List Changing Calling Group Assignments

MERLIN LEGEND Communications System Release 5.0	Issue 1
System Manager’s Guide 555-650-118	June 1997
6 Managing the System
Revising Allowed Lists	Page 6-69

NOTE:

To assign an extension to a new calling group, you must remove it from its old group before programming the new assignment.

Valid Entries

Extension numbers

Task List: Changing Calling Group Assignments 6

Obtain Form 7d, Group Calling.

If necessary, read “Group Calling” in the Feature Reference for detailed information about this feature.

Plan changes using the planning guidelines above; record the new values on Form 7d.

Open the System Programming menu from the console or a PC with SPM.

Program the change(s), following the instructions for “Group Calling

Member Assignments” in the “Optional Group Features” section of System

oProgramming, Chapter 3, or the summary programming instructions below. When you have finished, file Form 7d with the rest of the planning forms.

Programming Instructions 6

Console Procedure Extensions→More→Grp Calling→Members→Dial calling group ext. no.→Enter→Dial ext. no.→ Enter→ Exit→Exit→Exit

PC Procedure ￿→U→￿→￿→Type calling group ext. no.→ →Type ext. no.→￿→￿→￿→￿

Revising Allowed Lists 6

An Allowed List provides some flexibility for extensions with calling restrictions by allowing specified extensions to dial certain numbers (for example, 911), regardless of the extension’s calling restrictions. Use this procedure to modify an Allowed List of telephone numbers that can be dialed.

NOTE:

A Disallowed List takes precedence over an Allowed List.