Lucent Technologies 5 Ring Delays Affecting Coverage, Factory Timer Setting Range Description

MERLIN LEGEND Communications System Release 5.0	Issue 1
System Manager’s Guide 555-650-118	June 1997

6Managing the System

Changing Coverage Delay Options			Page 6-51
Table 6–8. Ring Delays Affecting Coverage
	Factory
Timer	Setting	Range	Description
Coverage Delay	3 rings	1–9 rings	Release 4.0 and prior systems, set systemwide. Delay
Interval*			before sending calls to Group Coverage, when:
			■ Sender also has Individual Coverage and
			receiver is available.
			■ Sender does not have Individual Coverage or
			receiver is not available, and Group Coverage
			receiver is calling group only or QCC queue only
			(no Group Cover buttons on multiline
			telephones).
Group Coverage	3 rings	1–9 rings	Release 4.1 and later systems, programmable for
Ring Delay			each extension. Delay before sending calls to Group
			Coverage, when:
			■ Sender has Individual Coverage and receiver is
			available (in addition to Primary Cover Ring
			Delay).
			■ Sender does not have Individual Coverage or
			receiver is not available, and Group Coverage
			receiver is calling group only or QCC queue only
			(no Group Cover buttons on multiline
			telephones).
Primary Cover	2 rings	1–6 rings	Release 4.1 and later systems, programmable for
Ring Delay			each extension. This timer sets:

■ The delay before a Primary Cover button programmed for Delay Ring begins to ring audibly.

■ The delay, in addition to the Group Coverage Ring Delay, before calls are sent to Group Coverage when the sender has Individual Coverage and any receiver is available.

Continued on next page

*In Release 4.1 and later systems, this setting is replaced by the Group Coverage Ring Delay.