Lucent Technologies 5 manual Merlin Legend Communications System Release

MERLIN LEGEND Communications System Release 5.0	Issue 1
System Manager’s Guide 555-650-118	June 1997
o
6 Managing the System
Adding a DLC Operator Position	Page 6-59

o

o

Assign the jack, following the instructions for “DLC Operator Positions” in the “System Operator Positions” section of System Programming, Chapter 3, or the summary programming instructions below.

NOTE:

This task requires an idle condition: System Idle.

Assign the lines/trunks, following the instructions for “Assign Trunks or Pools to Telephones” in the “System Operator Positions” section in System Programming, Chapter 3.

NOTE:

This task requires an idle condition: Extension Forced Idle for this extension jack. Also, if you need additional SA or SA Originate Only buttons, you should remove all lines using system programming, then assign the buttons using centralized telephone programming. For more information, see System Programming.

Using centralized telephone programming, assign Ringing Options as described in Chapter 5, “Centralized Telephone Programming,” in System Programming.

If you are adding a personal line, Loudspeaker Paging, or Pool buttons (Hybrid/PBX only), assign the outside lines/trunks to the buttons on the telephone following the instructions in “Assign Trunks or Pools to Telephones” in the “Telephones” section of System Programming, Chapter 3.

NOTE:

You may choose to copy line/trunk button assignments that other extensions have, for example, a Loudspeaker Paging button. For more information, see “Copy Line/Trunk Assignments” in the “Telephones” section of System Programming, Chapter 3.

Assign intercom or system access buttons by following the instructions in “Assign Intercom or System Access Buttons” in the “Telephones” section of System Programming, Chapter 3. Also, you may choose to use the Copy

Extension procedure described in ‘Copying‘ Feature and SA/ICOM Buttons’’ on page 6-28.

NOTE:

This task requires an idle condition: Extension Forced Idle.

If the extension requires a dedicated voice or voice pair of extension jacks to provide Voice Announce to Busy or to provide voice and data features, identify it to the system as such by following the instructions in “Analog Multiline Telephones with Voice Announce to Busy” in the “Telephones” section of System Programming, Chapter 3, or the instructions in “Data Features” in Chapter 4 of System Programming.