Lucent Technologies 5 To print extension information, To print all other reports, To#view report

MERLIN LEGEND Communications System Release 5.0	Issue 1
System Manager’s Guide 555-650-118	June 1997

6Managing the System

Using Reports Page 6-36

NOTES:

1.If you select the All option, the reports take several minutes to print. You may want to schedule use of the printer during off-peak hours.

2.If you select a report for which there is no information, the report header still prints.

3.Print reports if you cannot back up your system programming information.

4.If your system must handle more than 100 calls per hour, do not print reports during regular hours.

5.If you are printing from the console, your printer must be connected to the SMDR port. If you are programming on a PC with SPM, you have the following choices:

■Print reports on the SMDR printer (if available).

■Print reports on the PC printer.

■Save reports (on hard disk or floppy).

■View reports (browse).

To print system programming reports, use one of the following procedures:

Console Procedures	To print trunk information:
	More→Print→Trunk Info→Select trunk type→Exit
	To print extension information:
	More→Print→More→Ext Info→Dial ext.
	no.→Enter→Exit
	To print all other reports:
	More→Print→Select report→Exit
PC Procedures	To print trunk information:
	→ →￿→Select trunk type→￿

To print extension information:

→→U→￿→Type ext. no.→￿￿→￿

To print all other reports:

→ →Select report→

ToUsave report on disk:

→￿→Select report→￿→select GOTO FLOPPY from below console simulation screen→￿

To#view report:

+￿