INSTALLING THE SOFTWARE

Installing DV Media Pro Program

You need to install DV Media Pro to play back recorded

movie fi les or the transferred data from memory camcorder

with the USB cable on your PC. When you install the DV

Media Pro software on your Windows computer, you can

enjoy the following operations by connecting your memory camcorder to your computer via a USB cable.

-View movie recordings on PC:

DV Driver - DirectX9.0 - Video Codec

-PC camera/USB streaming function:

DV Driver - DirectX9.0 - Video Codec

Before you start!

•Turn on your PC. Exit all other applications running.

•Insert the provided CD into the CD-ROM drive.

-The setup screen appears automatically soon after the CD was inserted.

If the setup screen does not appear, click on "Start" on the bottom left corner and select "Run" to display a dialog. Type "D:\autorun.exe" and then press

ENTER, if your CD-ROM drive is mapped to "D:Drive".

Installing Driver - DV Driver and DirectX 9.0

•DV Driver is a software driver that is required to support establishing connection to a PC.

(If it is not installed, some functions will not be supported.)

1.Click on "DV Driver" on the setup screen.

•Driver software required is installed automatically. Following drivers will be installed:

-USB PC-CAMERA driver

-USB streaming driver (USB video transfer)

2.Click on "Confi rm" to fi nish driver installation.

3.If the "DirectX 9.0" is not installed, it is installed automatically after setting "DV Driver".

•After installing DirectX 9.0, PC needs to be restarted.

•If DirectX 9.0 is installed already, there is no need to restart the PC.

Application Installation - Video Codec

•Click on "Video Codec" on the setup screen. Video Codec is required to play movie fi les recorded by this memory camcorder on a PC.

71_English

安装软件

安装DV Media Pro程序

您必须安装 DV Media Pro才能使用USB数据线在计算机 上播放数码摄像机所录制的影片文件或者传输的数据。

当您在Windows电脑上安装DV Media Pro软件，您可

以通过USB数据线将数码摄像机与电脑相连进行以下操 作。

- 在电脑上观看录制的影音：

DV Driver - DirectX9.0 - Video Codec

-PC摄像头/USB输出功能：

DV Driver - DirectX9.0 - Video Codec

开始之前！

•打开电脑。退出所有其他的应用程序。

•将软件CD插入到电脑的CD-ROM驱动器。

-在CD插入不久，屏幕上自动显示安装界面。

如果未出现安装界面，点击左下角的 "开始" 按钮并且选择 "运行" 出现对话框。如果您的CD-ROM光驱对应位置为"D：Drive"，输入

"D:\autorun.exe" 然后按下ENTER回车键。

安装驱动程序 - DV Driver 和 DirectX 9.0

•DV Driver是支持建立电脑连接所需要的软件驱动程序。 (如果没有安装，某些功能将不会受到支持。)

1.在安装界面上单击 "DV Driver"。

•所需的驱动程序软件将会自动安装，下列驱动 程序将会安装：

-USB PC摄像头驱动程序

-USB 输出驱动程序 (USB 视频转移)

2.点击 "Confi rm" 完成驱动程序安装。

3.如果尚未安装 "DirectX 9.0" ，它将会在设置 "DV Driver" 后自动安装。

•安装 DirectX 9.0以后，需要重新启动计算机。

•若已经安装DirectX 9.0， 则不需要重新启动计算机。

安装应用程序 - Video Codec

•在设置屏幕上单击"Video Codec"。（视频编码解码器）

在计算机上播放数码摄像机录制的影片文件时，需要使用视频编码解 码器。

中文_71