Sharp AR-M620N Job build, Touch the JOB BUILD key on the special modes screen, Special Modes

SPECIAL MODES

Job build

Use job build mode when you need to copy more original pages than can be loaded at once in the document feeder (the maximum number of pages that can be loaded is 150). This function allows the original pages to be scanned in sets.

[Example] Copying 300 pages of A4 originals

		Originals
	1		1
		A:150 sheets
300 original pages

151

B:150 sheets

*Divide the originals into sets of 150 pages each. Scan the originals starting from the first page of set A. Scan set B next, taking care to keep the correct page order.

To display the special modes screen...

See "General procedure for using special functions" on page 5-2.

1 Touch the [JOB BUILD] key on the special modes screen.

ES			The	[JOB	BUILD]	key
			will	be highlighted		to
		DUAL
N SHIFT	ERASE
		COP	indicate that the function
			is turned on, and the job
	JOB	TANDE
LET COPY
	BUILD	COPY	build	icon	( )	will

appear in the upper left of the screen.)

2 Touch the [OK] key on the special modes screen.

	Return to the main
OK	screen of copy mode.
1/3

	DUAL PAGE
RASE
	COPY
JOB	TANDEM
BUILD	COPY

3 Place the first set of originals in the document feeder tray. (page 4-3)

4 Make sure that the desired paper size is selected, select the number of copies or other copy settings, and press the [START] key.

Scanning of originals will start. After scanning of the first set of originals (A

in the example above) is completed, remove the scanned originals, place the next set of originals

(set B in the example) and press the [START] key. Repeat this operation until all sets of originals have been scanned.

5 Touch the [READ-END] key.

PLACE NEXT ORIGINAL. PRESS [START].

WHEN FINISHED, PRESS [READ-END].

READ-END

To cancel the job build function, touch the [JOB BUILD] key on the special modes screen (step 1). The highlighted display will be cancelled.

5-8