Sharp AR-M700U, AR-M550N, AR-M620N Special Papers, Load the special paper in the bypass tray

SPECIAL PAPERS

Special papers including transparency film, postcards and tabbed paper must be fed through the bypass tray.

1 Place the original in the document feeder tray or on the document glass. (pages 4-3to 4-6)

5 Select the bypass tray.

0

		AUTO
	A4	ORIGINAL
N	HEAVY PAPER	AUTO
		EXPOSURE
PAPER	5. A4	PAPER SELECT
N	PLAIN	100%
		COPY RATIO

2 Load the special paper in the bypass tray.

See page 2-8for the specifications of paper that can be used in the bypass tray.

For the paper loading

instructions, see "Loading paper in the bypass tray" (page 2-6).

6 Select any desired copy settings such as the exposure or number of copies, and then press the [START] key.

When copying from the document glass in the sort mode using the [START] key, touch the [READ-END] key after all originals have been scanned (step 8 on page 4-12).

3 Touch the [PAPER SELECT] key.

UTO

4EXPOSURE

AUTO A4

PAPER SELECT

100%

4 Set the type and size of paper loaded in the bypass tray.

N

APER

N

A4

HEAVY PAPER

5.A4

PLAIN

				0		1	The (X) key shows the
			AUTO				currently	selected
		ORIGINAL
							paper type.
			AUTO
		EXPOSURE
							The (Y) key shows the
PAPER SELECT					2
100%
							size of paper loaded
	COPY RATIO

in the bypass tray.

(X)(Y)

3To change the displayed paper type, touch the

(X)key before touching the (Y) key. When loading paper, if you changed the paper size from an AB size to an inch size (or from an inch size to an AB size), or if you changed the paper type, be sure to change the paper type and size settings as explained in steps 5 to 7 on page 2- 10, and steps 8 to 10 on page 2-11.

4-20