Sharp AR-M550U 5-28, Card shot, Touch the PAPER SELECT key and then select the desired paper size

SPECIAL MODES

Card shot

When copying a card, this function allows you to combine the front and back sides on a single sheet of paper.

Original

CARD

Front of card

Back of card

Copy

CARD

CARD

Example:	Example:
Portrait	Landscape
A4 (8-1/2") size	A4 (8-1/2") size

●Copying is only possible on standard size paper.

●A copy ratio cannot be selected when using this function.

●The image cannot be rotated when using this function.

1 Touch the [PAPER SELECT] key and then select the desired paper size.

								The selected paper size
READY TO SCAN FOR COPY.
								key	is highlighted and
1. A4		2. B5						the	paper selection
							A4
	PLAIN			PLAIN		PLAIN		screen closes.
3.	A4		HEAVY PAPER		5. A4
4.	A3
				PLAIN		PLAIN

NOTE

If paper of the desired size is not loaded in any tray, load paper of the required size in a paper tray or the bypass tray. (See "Setting the paper type and paper size" on page 2-10.)

To display the special modes screen...

See "General procedure for using special functions" on page 5-2.

2 Touch the [CARD SHOT] key in the special modes screen (2nd screen).

3 Enter the X dimension (width) and Y dimension (length) of the original with the keys.

CANCEL OK

SIZE RESET

FIT TO

PAGE

●X (width) is initially selected. Enter X and then touch the Y () key to enter Y.

●To return the X and Y values to the initial settings configured in the key operator programs, touch the [SIZE RESET] key. ("CARD SHOT SETTINGS" on page 14 of the key operator's guide).

●To have the images enlarged or reduced by a suitable ratio based on the entered original size so that the front and back sides fit into the selected paper size, touch the [FIT TO PAGE] key.

TRANSPARENCY	MULTI SHOT
INSERTS
TAB COPY	CARD SHOT

The CARD SHOT setting screen will appear. A card shot icon ( , etc.) will also appear in the upper left corner of the screen to

indicate that the function is turned on.

5-28