Sharp AR-M620N Finishing modes and finisher functions, Finisher And Saddle Stitch Finisher

FINISHER AND SADDLE STITCH FINISHER

Finishing modes and finisher functions

Touch the [OUTPUT] key on the main screen of copy mode to display the screen that allows selection of sort, staple sort, group function, centreline stapling, and the output tray.

OUTPUT

SORT

STAPLE

SORT

GROUP

1[GROUP] key (See page 3-4.)

0

		OK
FINISHER	CENTRE
TRAY	TRAY

SADDLE

STITCH PUNCH

OFFSET

6[CENTRE TRAY] key

When Group is selected, copies will be grouped by page.

If the centre tray is selected, output paper will be delivered to the exit tray located above the main unit.

2[STAPLE SORT] key (See page 3-4.)

When Staple Sort is selected, sorted sets will be stapled and delivered to the offset tray. (They will not be offset stacked.) Select from three stapling positions.

3[SORT] key (See page 3-4.)

When Sort is selected, sets of copies will be collated.

4[FINISHER TRAY] key (See page 3-2.)

When the offset function is selected, output is delivered offset to the finisher tray. (The finisher tray is automatically selected when the staple sort function is turned on.)

5[OFFSET] key (See page 3-4.)

The offset function operates when a checkmark appears in this key. (The offset checkmark is automatically cleared when the staple sort function is enabled.)

7[OK] key

Touch to close the [OUTPUT] screen and return to the main screen.

8[SADDLE STITCH] key (See page 3-5.)

This is displayed when the saddle stitch finisher is installed, and is used to staple pages at the centre and fold them in half to create a pamphlet.

Touch this key to display the pamphlet copy setting screen (page 5-6). (This is only possible when a checkmark appears in the checkbox of the [AUTOMATIC SADDLE STITCH] key operator program (See page 12 of the key operator's guide.))

9[PUNCH] key (See page 3-5.)

This is used to punch holes in printed pages when an optional punch module is installed.

NOTE

When a functions is selected, it is highlighted.

3-6