Sharp AR-M550U, AR-M700U 4-12, Sided Copy Output File, Select9. the desired output mode. page

FILE

QUICK FILE

NORMAL COPYING

4 Select9.) the desired output mode. (page 4-

7 Press the [START] key.

2-SIDED COPY

OUTPUT

FILE

Group mode is the default mode.

To select sort mode, touch the [OUTPUT] key, touch the [SORT] key in the screen that appears, and then touch the [OK] key.

Replace the original with the next original and press the [START] key. Repeat this operation until all originals have been scanned.

If you selected "Sort" for the output mode in step 4 and pressed the [START] key, it is necessary to touch the [READ- END] key.

5 Use the numeric keys to set the desired number of copies.

Up to 999 can be set.

If you are only making a

single copy, the copy can be made with the copy number display

showing "0".

Use the [C] (clear) key to

cancel an entry if a mistake has been made.

6 If needed, touch the [FILE] key or the [QUICK FILE] key.

Either key can be touched to store the scanned document image on the machine's hard disk. The stored image can be re-used

later.

For more information on this function, see "Document filing function" in chapter 7.

If the [FILE] key is greyed out, only the [QUICK FILE] key can be selected.

When you touch the [QUICK FILE] key, a message asking you to confirm the save will appear. Touch the [OK] key in the message screen and go to the next step.

If you wish to cancel the save, touch the [QUICK FILE] key after touching the [OK] key so that the [QUICK FILE] key is no longer highlighted.

8 Touch the [READ-END] key.

PLACE NEXT ORIGINAL. PRESS [START].

WHEN FINISHED, PRESS [READ-END].

READ-END

To cancel copying...

To cancel a copy job in progress, press the [CA] key. A confirmation message will appear. Touch the [YES] key to cancel copying.

4-12