Manuals / Sharp / Computer Equipment / All in One Printer

Sharp AR-M550U Loading paper in the bypass tray, Loading tabbed paper in the bypass tray, Example

Models: AR-M620U AR-M550U AR-M700N AR-M620N AR-M550N AR-M700U

1 172
Download 172 pages 5.71 Kb
Page 34
Image 34
Loading paper in the bypass tray

LOADING PAPER

Loading paper in the bypass tray

The bypass tray can be used to print on plain paper, postcards, label sheets, tabbed paper, and other special papers. When using SHARP standard paper, up to 100 sheets can be loaded (up to 20 postcards) for continuous printing similar to the other trays. For the paper types that can be used in the bypass tray, see "Specifications of paper trays (Types and sizes of paper that can be used in the trays)" on page 2-8.

NOTE

After loading the paper in the bypass tray, be sure to set the paper type and size (step 4) if these were changed.

1 Open the bypass tray.

When loading A3, B4,

A4R, 11" x 17", 8-1/2" x

14", 8-1/2" x 13" or

8-1/2" x 11"R size paper,

be sure to pull the auxiliary tray all the way out. If the auxiliary tray is

not pulled all the way out, the size of the loaded paper will not be correctly displayed.

4 Set the type and size of the paper loaded in the bypass tray.

If the paper size was changed from an AB size to an inch size, or from an inch size to an AB size, or if the paper type was changed, be sure to change the appropriate settings as explained in "Setting the paper type and paper size" (see page 2-10).

5 This completes the procedure for loading paper in the bypass tray.

■Loading tabbed paper in the bypass

tray

[Example]

Make sure that the positions of the tabs correspond with the originals as shown below.

2 Set the bypass tray guides to the width of the copy paper.

3 Insert the copy paper all the way into the bypass tray. (Do not force the paper in.)

1 Open the bypass tray.Original

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ABC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DEF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GHI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

JKL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1st page

 

2nd page 3rd page 4th page

Place the tabbed paper face up.

4 Set the type and size of the paper loaded in the bypass tray.Tabbed paper

Front side

1st page 5 This completes the procedure for loading paper in the bypass tray. 2nd page

3rd page 4th page

Place the copy paper face up. If the bypass tray guides are set wider

than the copy paper, the

inside of the machine

■Loading tabbed paper in the bypass may become soiled, resulting in smudges on succeeding copies. A gap may cause skewing

or wrinkling.

Front

2-6

Page 33 Page 35
Page 34
Image 34
Sharp AR-M550U Loading paper in the bypass tray, Loading tabbed paper in the bypass tray, Open the bypass tray, Example
Page 33 Page 35