Sharp AR-M700N, AR-M700U 4-11, Copying from the document glass, AUTO A4, 100% OPY RATIO, Exposure

READY TO SCAN FOR COPY.

NORMAL COPYING

Copying from the document glass

When copying originals which cannot be fed from the automatic document feeder such as thick originals, open the document cover and copy the originals from the document glass.

■1-sided copies of 1-sided originals

OriginalCopy

1 Place the original on the document glass. (pages 4-3to 4-6)

3 Ensure that paper of the same size as the original is automatically selected*.

UTO

EXPOSURE

AUTO A4

PAPER SELECT

100% OPY RATIO

The selected tray will be

highlighted or the message "LOAD xxxxxx PAPER." will appear. If the message appears, load paper in a paper tray with paper of the

4

required size.

Document glass scale

mark
B5	B4 or
	8½x14
A4 or 8½x11	A3 or 11x17

Document glass scale

mark
	B5
A4	or 8½x11

Even if the message above is displayed, copying can be performed onto the currently selected paper.

*The following requirements must be satisfied. Originals of a standard size (A3, B4, A4, A4R, B5, B5R or A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8- 1/2" x 11"R or 5-1/2" x 8-1/2"R)) are set and the auto paper select function is enabled.

If originals of a size other than the sizes above are

●Align the corner of the original with the tip of the

arrow mark on the document glass scale.

●Place the original in the appropriate position for its size as shown above.

2 Ensure that the 1-sided to 1-sided copy mode is selected.

										The one-sided to one-
			ORIGINAL
									A4
										sided mode is selected
					22					when no icon for a two-
	11						2
			1
						A4
										sided mode appears in
										the dashed area on the
1.				2.
								5.	A4
A4						A5
										display. If an icon
3.		B4
4.		A3

appears, perform steps

3 to 5 on page 4-7 and then go to step 3.

1.	A4	2.	B5			A4	to be copied, manually
	PLAIN		PLAIN		PLAIN		select the desired paper
3. B4				5. A4
			PLAIN				size	by	touching	the
4. A3			PLAIN		PLAIN		[PAPER		SELECT]	key
							and	then	touching	the
	desired paper size selection key.

The selected key will be highlighted and the paper selection screen will close. To close the paper selection screen without making a selection, touch the [PAPER SELECT] key.

4-11