Sharp AR-M620U Removing a staple jam in the finisher, Holding the knob, lower part A, position

FINISHER AND SADDLE STITCH FINISHER

■Removing a staple jam in the finisher

1Perform steps 1 to 2 of the procedure for "Replacing the cartridge in the finisher" on page 3-7.

2Holding the knob, lower part (A).

Stapling area

(A)

NOTE

Do not touch the stapling area.

The stapler could injure you.

3 Remove any jammed staples.

4 Holding the knob, return part (A) to its original position.

(A)

5 Return the staple case to its original
position.
Insert the cartridge	all	3
the way in until it clicks
into place.

6 Close the front cover of the finisher.

3-9