$GYDQFHG3DUDPHWHUV
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01 215
 7UDS+RVW3DVVZRUG
Use the 7UDS+RVW3DVVZRUG field to enter a password that will be
included in the SNMP trap messages. You can use this password at the trap
host station to filter out trap messages that may have been sent to the trap
host station erroneously.
 6103,3$FFHVV/LVW
You can use the 6103,3$FFHVV/LVW to create an extra level of security in
addition to the read an read/write passwords. This will allow you to authorize
a limited number of LAN administrator stations to view and/or modify the
configuration of the RLMs, based upon the IP address of these stations.
The field 6103,3$FFHVV/LVW should typically include the IP address of
all LAN administrator stations that will use the RLM Manager to configure
and/or monitor your Radio Link Modules.
To authorize the LAN administrator station you must enter:
• The IP address of the station(s), and
• The Access Point RLM network interface through which they will access
the Access Point RLM.
To indicate the interface, use either:
• “1” for Ethernet
• “2” for the wireless network interface in socket A, or
• “3” for the wireless network interface in socket B.
Alternatively you can use the value “x” to allow the identified IP address to
access the Radio Link Module via any of the available interfaces.