288 Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
61037UDS0HVVDJHV
SNMP trap messages are part of the trap host mechanism which can
be used to inform a network administrator when somebody resets a
Access Point RLM unit, loads a new configuration into the access
point, or performs a forced reload procedure.
The trap host alert message will enable the network administrator to
verify whether this was an authorized action or not.
To receive the Trap Alert messages, the management station needs
to have a standard Trap Host Agent installed to h andle the trap
messages.
6156LJQDOWR1RLVH5DWLR
The Signal-to-Noise Ratio (SNR) is the primary diagnostic counter to
diagnose wireless performance. The SNR indicates the relative
strength of the received Signal Level compared to The Local Noise
Level.
6SDQQLQJ7UHH
An advanced Bridge setup option for complex network topologies that
enables you to enhance data traffic efficiency and eliminate the
possibility of data loops.