'RLQJD)RUFHG5HORDG
246 Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
& 'RLQJD)RUFHG5HORDG
A forced reload procedure consists of three steps:
1. Step 1 - Preparations.
2. Step 2 - Set to “Forced Reload” Mode.
3. Step 3 - Configuring and Uploading Files.
One additional step is optional, but recommended:
4. Creating a Back-up File

& 6WHS3UHSDUDWLRQV

A forced reload procedure can only be done when you have physical access
to the RLM.
• Familiarize yourself with the location of the RLM:
Do you need special equipment to access the Access Point RLM, such
as a ladder or keys to get into the room where the Radio Link Module is
located?
• Do you have a back-up copy of the RLMs current configuration file
(*.cnf)?
—If
<HV, you can use the back-up copy to restore the original
configuration.
—If
1R, you will need to set all the user-defined parameters for the
RLM that apply in your network again.
Back-up copies may have been created upon initial installation using the
'RZQORDG&RQILJ)LOH option of the RLMManager program.