Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01 279
You can use the Link Test to analyze the quality of the wireless
communication, and to determine or optimize the placement of
stations and antennas.
0
0$&$GGUHVV
16-digit hexadecimal number that identifies a networking product on
the network.
0$&$GGUHVV)LOWHU
An advanced Bridge setup parameter for Radio Link Modules that
enables you to deny data traffic between two specific devices via the
wireless interface(s) of the access point bridge.
You can use the Static MAC Address filter to optimize the
performance of a wireless (and wired) network.
For example, to prevent redundant traffic from being transmitted over
the wireless network, you could deny traffic between two particular
servers, identified by their MAC Address and their location as
perceived by the Access Point RLM (on the ‘wired’ or wireless’ port of
the bridge).
In most situations, however, it will be easier to control redundant
traffic via other filtering options, such as ‘Protocol Filtering.