$GYDQFHG3DUDPHWHUV
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01 205
To enable spanning tree:
1. Cli ck th e 6SDQQLQJ7UHH button to open the Spanning Tree Setup
window (see Figure 38Spanning Tree Setup window).
2. Click the (QDEOH6SDQQLQJ7UHH check box;
3. Use default values (see Figure 38Spanning Tree Setup window);
4. Click 2. to return to the %ULGJH tab.
5. Click 2. again if you want to save this configuration and return to the
main RLM Manager window. Otherwise continue changing other
parameters.
At this point, we recommend that you create a backup file, as described in
Step4 - Create a Back-up of the Configuration (page 66).
 6WRUP7KUHVKROG
The 6WRUP7KUHVKROGV button allows you to set parameters that are used
in protecting the network against message overload as received from a
single station or via a specific port.
The 6WRUP7KUHVKROGV window allows you to determine the maximum
number of multicast and broadcast messages that will be forwarded from
one port (or address) per second.