Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01 269
The Access Control Table is loaded into the Radio Link Module as part
of an configuration upload.

$QDO\VLV3ROOLQJLQWHUYDO

A parameter that enables you to control the responsiveness of the
SIMATIC NET IWL RLMManager Remote Link Test. The Analysis
Polling Interval determines how often RLMManager will read the
diagnostic tallies of the bridge unit. Valid values: 1-15 seconds.
See also: Monitoring your SIMATIC NET IWL Network (page 67)
%

%DVLF$FFHVV1HWZRUN

A basic access network consists of a small sized wireless LAN, with
no connections via gateways or routers. The number of RLM in this
network typically varies between 1 and 5. The administrator stations
need to have the TCP/IP protocol stack loaded and use IP addressing
to configure and monitor the RLMs. IP addressing and the TCP/IP
protocol are not strictly necessary for client stations.

%HDFRQ

A message that is transmitted at regular intervals by the RLM to all
wireless stations in the domain. Beacon messages are used to
maintain and optimize communications by helping mobile SIMATIC