Siemens ST PCS 7 manual 10/22, Automation systems

© Siemens AG 2008

Automation systems

Fault-tolerant automation systems

		Individual components
	■Selection and Ordering Data		Order No.
	Individual components of the fault-tolerant SIMATIC PCS 7
	automation systems
	CPU 412-3H		6ES7 412-3HJ14-0AB0	B)
	RAM 768 KB (512 KB for program
	and 256 KB for data)
	Module occupies 2 slots
		CPU 414-4H	6ES7 414-4HM14-0AB0	B)
		RAM 2.8 MB (1.4 MB each for
		program and data)
		Module occupies 2 slots
		CPU 417-4H	6ES7 417-4HT14-0AB0	B)
		RAM 30 MB (15 MB each for pro-
		gram and data)
		Module occupies 2 slots
		Sync set
		For linking the two redundant 412-
		3H, 414-4H or 417-4H CPUs;
		for distances up to
		• 10 m, consisting of 4 sync mod-	6ES7 656-7XX30-0XX0
		ules for up to 10 m and 2 fiber-
		optic sync cables, 1 m each
		• 10 km, consisting of 4 sync mod-	6ES7 656-7XX40-0XX0
		ules for up to 10 km
		Note: please order fiber-optic
		sync cables (2 units) in the re-
		quired length separately.
		Sync module
		For linking the two CPUs 412-3H,
		414-4H or 417-4H;
		two modules required per CPU
		For distances of up to
		• 10 m	6ES7 960-1AA04-0XA0
		• 10 km	6ES7 960-1AB04-0XA0
		Sync cable (fiber-optic cable)
10		For connecting the two 412-3H,
		414-4H or 417-4H CPUs;
		each redundant automation sys-
		tem requires 2 cables
		• 1 m	6ES7 960-1AA04-5AA0
		• 2 m	6ES7 960-1AA04-5BA0
		• 10 m	6ES7 960-1AA04-5KA0
		Other lengths	auf Anfrage
		Memory Card RAM
		• 1 MB	6ES7 952-1AK00-0AA0
		• 2 MB	6ES7 952-1AL00-0AA0
		• 4 MB	6ES7 952-1AM00-0AA0
		• 8 MB	6ES7 952-1AP00-0AA0
		• 16 MB	6ES7 952-1AS00-0AA0
		• 64 MB	6ES7 952-1AY00-0AA0
		Memory Card Flash-EPROM
		Only required to update firmware.
		Alternative: firmware update via
		the engineering system
		• 8 MB	6ES7 952-1KP00-0AA0

■Selection and Ordering Data		Order No.
	CP 443-1	6GK7 443-1EX11-0XE0
	Communications processor for
	connection of SIMATIC S7-400 to
	Industrial Ethernet through
	TCP/IP, ISO and UDP; for S7 com-
	munication, S5-compatible com-
	munication (SEND/RECEIVE) with
	FETCH/WRITE with or without
	RFC 1006, diagnostics expan-
	sion, Multicast, commissioning
	through LAN 10/100 Mbit/s, with
	electronic manual on CD-ROM
	CP 443-5 Extended	6GK7 443-5DX04-0XE0
	Communications processor for
	connection of SIMATIC S7-400 to
	PROFIBUS as DP master or for
	S7 communication, for increasing
	the number of DP lines, for data
	set routing with SIMATIC PDM
	and for 10-ms time stamp,
	electronic manual on CD;
	module occupies 1 slot
	PS 407 power supply module;	6ES7 407-0KA02-0AA0
	10 A
	120/230 V AC/DC; 5 V DC/10 A,
	24 V DC/1 A;
	with battery compartment for
	2 backup batteries, module occu-
	pies 2 slots
	PS 407 power supply module;	6ES7 407-0KR02-0AA0
	10 A, redundant design
	120/230 V AC/DC; 5 V DC/10 A,
	24 V DC/1 A;
	with battery compartment for
	2 backup batteries, module occu-
	pies 2 slots
	PS 407 power supply module;	6ES7 407-0RA02-0AA0
	20 A
	120/230 V AC/DC; 5 V DC/20 A,
	24 V DC/1 A;
	with battery compartment for
	2 backup batteries, module occu-
	pies 2 slots
	PS 405 power supply module;	6ES7 405-0KA02-0AA0
	10 A
	24 V DC; 5 V DC/10 A, 24 V
	DC/1 A;
	with battery compartment for
	2 backup batteries, module occu-
	pies 2 slots
	PS 405 power supply module;	6ES7 405-0KR02-0AA0	B)
	10 A, redundant design
	24 V DC; 5 V DC/10 A, 24 V
	DC/1 A;
	with battery compartment for
	2 backup batteries, module occu-
	pies 2 slots
	PS 405 power supply module;	6ES7 405-0RA02-0AA0
	20 A
	24 V DC; 5 V DC/20 A, 24 V
	DC/1 A;
	with battery compartment for
	2 backup batteries, module occu-
	pies 2 slots
	Backup battery	6ES7 971-0BA00
	Type AA, 2.3 Ah

B) Subject to export regulations: AL: N, ECCN: EAR99H

10/22

Siemens ST PCS 7 · Update November 2008