Siemens ST PCS 7 manual Simatic PCS 7 BOX

		© Siemens AG 2007
	Starter systems
	SIMATIC PCS 7 BOX
	SIMATIC PCS 7 BOX 416
	■Overview		■Design
3
					All-metal enclosure,
					rack-mountable, also
					suitable for portrait
					assembly
				RUN/STOP LEDs	1 x DVI-I (VGA via
				RUN mode switch	supplied adapter)
				Backup battery connection	1 vacant PCI expansion
				MPI/DP interface	slot, e.g. for multi-VGA
					graphics card
				External connection	Slot for CompactFlash
				24 V DC supply
				DP interface	card (accessible from
					outside)
					COM1: Serial interface 1
				Power supply	4 x USB 2.0 interfaces
				24 V DC
				On/off button	2 x Gigabit Ethernet
					connection for
					10/100/1000 Mbit/s
				Optical drive	DP interface
				DVD +/- R/RW	Power supply fan

The SIMATIC PCS 7 BOX 416 equipped with a WinAC Slot 416 V4.0 hardware controller is based like the SIMATIC PCS 7 BOX RTX on the industrial PC SIMATIC Box PC 627B. With regards to the automation performance, it is positioned slightly above the SIMATIC PCS 7 BOX RTX, and is particularly recommendable if high availability or changes to the configuration during operation (CiR) are relevant factors for the selection.

Design of SIMATIC PCS 7 BOX 416

SIMATIC PCS 7 BOX 416 systems are offered in the form of two product bundles:

•Preinstalled SIMATIC PCS 7 all-in-one system with AS, ES and OS functionality,

including AS/OS Engineering and Runtime licenses for 250 POs

•Preinstalled SIMATIC PCS 7 runtime system with AS and OS functionality,

including AS/OS Runtime license for 250 POs

These bundles can be extended by the following expansion components (see also page 2/15 and catalog on PC-based Automation):

•SIMATIC PCS 7 PowerPacks/Runtime licenses for up to 2000 POs

-AS/OS Software Engineering PowerPack for all-in-one sys- tem

-OS Software Single Station PowerPack and AS Runtime license for runtime system

•SIMATIC PDM package for PCS 7

•SIMATIC PC keyboard

•LC and CRT displays for office and industrial environments

•SITOP smart power supply 230 AC/24 V DC, 240 W

•SITOP DC UPS module 15 A with RS 232 interface

•DC UPS software for further processing of the signals sent by the DC UPS module with RS 232 interface on the PC (status visualization as well as definition of response to various oper- ating states of the DC UPS module), executes with Windows NT, 2000 and XP; freeware for downloading at www.sie- mens.com/sitop

•SITOP battery module 24 V DC/20 A/7 Ah for DC UPS module 15 A

3/8

Siemens ST PCS 7 · November 2007