Siemens ST PCS 7 manual 11/35, Digital electronics modules, DI Namur

© Siemens AG 2007

						Process I/O
					ET 200iSP distributed I/O
					Electronics modules and watchdog module
■Selection and Ordering Data		Order No.		■Selection and Ordering Data		Order No.
	Digital electronics modules				Digital output module with
	Digital input modules				L switch-off
					(external actuator switch-off via
	8 DI NAMUR	6ES7 131-7RF00-0AB0	B)		L-signal);
	For evaluation of NAMUR sen-				for switching of solenoid valves,
	sors, connected/non-connected				DC relays, signal lamps, actua-
	contacts, as well as for recording				tors
	counter pulses or measuring fre-
					4 DO DC 23.1 V/20 mA	6ES7 132-7GD00-0AB0	B)
	quencies
					• 4 channels with 20 mA each
	• 8 x NAMUR (NAMUR sensor
					• Short-circuit monitoring
	on/off, NAMUR changeover
	contact) or connected/				• Wire break monitoring
	non-connected inputs				• Parameterizable connection of
	(single/changeover contact)
					substitute value in case of CPU
	• 2 channels optionally usable as
					failure
	counters (max. 5 kHz) or fre-				• Load-free switching of outputs
	quency meters (1 Hz ... 5 kHz)
					via external intrinsically-safe
	• Time tagging 5 ms, rising or fall-
					signal
	ing edge
					4 DO DC 17.4 V/27 mA	6ES7 132-7GD10-0AB0
	• Wire break monitoring
					• 4 channels with 27 mA each or
	• Short-circuit monitoring
					• 2 outputs connected in parallel
	• Sensor power supply monitoring
					with 54 mA each
	• Flutter monitoring
					• Short-circuit monitoring
	Digital output module with				• Wire break monitoring
	H switch-off				• Parameterizable connection of
	(external actuator switch-off via
					substitute value in case of CPU
	H-signal);
					failure
	for switching of solenoid valves,
					• Load-free switching of outputs
	DC relays, signal lamps, actua-
	tors				via external intrinsically-safe sig-
					nal
	4 DO DC 23.1 V/20 mA	6ES7 132-7RD01-0AB0	B)
					4 DO DC 17.4 V/40 mA	6ES7 132-7GD20-0AB0
	• 4 channels with 20 mA each
					• 4 channels with 40 mA each or
	• Short-circuit monitoring
					• 2 outputs connected in parallel
	• Wire break monitoring
					with 80 mA each
	• Parameterizable connection of
					• Short-circuit monitoring
	substitute value in case of CPU
					• Wire break monitoring
	failure
	• Load-free switching of outputs				• Parameterizable connection of
	via external intrinsically-safe				substitute value in case of CPU
	signal				failure
	4 DO DC 17.4 V/27 mA	6ES7 132-7RD11-0AB0			• Load-free switching of outputs
	• 4 channels with 27 mA each or				via external intrinsically-safe sig-			11
					nal
	• 2 outputs connected in parallel
					B) Subject to export regulations: AL: N, ECCN: EAR99H
	with 54 mA each
	• Short-circuit monitoring
	• Wire break monitoring
	• Parameterizable connection of
	substitute value in case of CPU
	failure
	• Load-free switching of outputs
	via external intrinsically-safe sig-
	nal
	4 DO DC 17.4 V/40 mA	6ES7 132-7RD21-0AB0
	• 4 channels with 40 mA each or

• 2 outputs connected in parallel with 80 mA each

• Short-circuit monitoring

• Wire break monitoring

• Parameterizable connection of substitute value in case of CPU failure

• Load-free switching of outputs via external intrinsically-safe sig- nal

Siemens ST PCS 7 · November 2007

11/35