Siemens ST PCS 7 manual Passive network components ITP cables and connectors

© Siemens AG 2007

Communication

Industrial Ethernet

Passive network components:

ITP cables and connectors

■Overview

Electrical transmission media

Terminals can be connected through industrial twisted pairs (ITPs). The preassembled ITP standard cable with Sub-D con- nectors is available for connection between stations and network components. Line lengths of up to 100 m can be achieved while saving on patch technology.

The ITP standard cable 9/15 is equipped with a 9-pin and a

15-pin connector. The cable is used for direct connection of ter- minals with ITP interface to Industrial Ethernet components with ITP interface.

The ITP XP standard cable 9/9 is equipped with two 9-pin con- nectors. This cable is crossed for direct connection of two Indus- trial Ethernet network components with ITP interface.

The ITP XP standard cable 15/15 is equipped with two 15-pin connectors. This cable is crossed for direct connection of two terminals with ITP interface.

The Industrial Ethernet ITP connectors have Sub-D connectors made of metal and are available in two versions:

•9-pin plug with straight cable outlet, for connection to OSM/ESM, OLM or ELM

•15-pin plug with variable cable outlet, for connection to termi- nals with ITP interface

Alternatively, the terminals can also be connected to twisted pair (TP cord) cables. Detailed information on TP cord cables can be found in the IK PI catalog, in the A&D Mall or in CA 01 at "Com- munication/Networks / SIMATIC NET communication systems".

■Selection and Ordering Data		Order No.
ITP Standard Cable for
Industrial Ethernet
Not preassembled, cut-to-length
	2 x 2-core, without connectors	6XV1 850-0AH10
	For connection of a terminal; for
	self-assembly of connectors or for
	the connection between patch
	panel and socket
	ITP Standard Cable 9/15
	ITP installation cable for direct
	connection of terminals with ITP
	interface to Industrial Ethernet
	network components with ITP
	interface;
	with a 9-pin and a 15-pin Sub-D
	plug
	• 2 m
		6XV1 850-0BH20
	• 5 m	6XV1 850-0BH50
	• 8 m
		6XV1 850-0BH80
	• 12 m	6XV1 850-0BN12
	• 15 m	6XV1 850-0BN15
	• 20 m	6XV1 850-0BN20
	• 30 m	6XV1 850-0BN30
	• 40 m	6XV1 850-0BN40
	• 50 m	6XV1 850-0BN50
	• 60 m	6XV1 850-0BN60
	• 70 m	6XV1 850-0BN70
	• 80 m	6XV1 850-0BN80	9
	• 90 m	6XV1 850-0BN88
	• 100 m	6XV1 850-0BT10
	ITP XP Standard Cable 9/9
	Crossed ITP installation cable for
	direct connection of two Industrial
	Ethernet network components
	with ITP interface;
	with two 9-pin Sub-D plugs
	• 2 m
		6XV1 850-0CH20
	• 5 m	6XV1 850-0CH50
	• 8 m	6XV1 850-0CH80
	• 12 m	6XV1 850-0CN12
	• 15 m	6XV1 850-0CN15
	• 20 m	6XV1 850-0CN20
	• 30 m	6XV1 850-0CN30
	• 40 m	6XV1 850-0CN40
	ITP XP Standard Cable 15/15
	Crossed ITP installation cable for
	direct connection of two terminals
	with ITP interface;
	with two 15-pin sub-D plugs
	• 2 m
		6XV1 850-0DH20
	• 6 m	6XV1 850-0DH60
	• 10 m	6XV1 850-0DN10
	ITP Connector for Industrial
	Ethernet
	• 9-pin, for connection to
		6GK1 901-0CA00-0AA0
	OSM/ESM, OLM or ELM
	• 15-pin, for connection to	6GK1 901-0CA01-0AA0
	terminals with ITP interface

Siemens ST PCS 7 · November 2007

9/25