Siemens ST PCS 7 manual Interface modules, 11/11, IM 153-2 High Feature 6ES7 153-2BA02-0XB0

© Siemens AG 2007

			Process I/O
		ET 200M distributed I/O
			Interface modules
■Overview	■Selection and Ordering Data		Order No.
		IM 153-2 High Feature	6ES7 153-2BA02-0XB0	B)
		Slave interface module for con-
		nection of an ET 200M to
		PROFIBUS DP, with time stamp
		(accuracy 1 ms), support of
		HART functionality, F modules,
		FM modules, "Configuration in
		RUN" function; also for use in
		redundant systems
		IM 153-2 FO High Feature	6ES7 153-2BB00-0XB0	B)
		Slave interface module for con-

nection of an ET 200M to optical PROFIBUS DP; support of HART functionality, F modules, FM mod- ules, "Configuration in RUN" func- tion; also for use in redundant systems

B) Subject to export regulations: AL: N, ECCN: EAR99H

The IM 153-2 High Feature interface module (electrical PROFIBUS DP transmission) or IM 153-2 FO High Feature inter- face module (optical PROFIBUS DP transmission) is required to connect the ET 200M remote I/O station to the PROFIBUS DP fieldbus. Depending on the fieldbus configuration (single/redun- dant), the ET 200M remote I/O station can be connected via one single or two redundant interface modules.

The IM 153-2 High Feature supports the following functions:

7HART configuring of intelligent field devices

7Configuration of ET 200M I/Os in RUN mode of the automation system

7Connection to redundant AS 412H / AS 414H / AS 417H auto- mation systems

7Use of ET 200M function modules (controller and counter modules)

7Operation of up to 12 I/O modules per remote I/O station

7Time stamping (SOE) with the safety-related SM 326F digital input module (F-DI24)

7Transmission of additional values with HART secondary vari-

	ables of the HART SM 331 and SM 332 analog modules (up to	11
	4 per channel or up to 8 per module)
On the other hand, the fiber-optic (FO) version IM 153-2 FO High
Feature provides the following functions:
7	HART configuring of intelligent field devices
7	Configuration of ET 200M I/Os in RUN mode of the automation
	system
7	Connection to redundant AS 412H, AS 414H and AS 417H
	automation systems
7	Use of ET 200M function modules (controller and counter
	modules)
7	Operation of up to 8 I/O modules per remote I/O station

Notes:

In order to use the hot swapping function, it is necessary to use the active bus modules and the DIN rail for hot swapping (refer to page 11/12). When using the IM 153-2 FO, additional plastic FOCs and an assembly set for Simplex connectors are required (refer to page 9/40).

Siemens ST PCS 7 · November 2007

11/11