Siemens ST PCS 7 ES hardware, ES single station, Options/expansions, Technical specifications4

© Siemens AG 2007

Engineering system

ES hardware

ES single station

	The scope of delivery also includes a mouse. The keyboard and
■Overview
	monitor must be ordered separately (see page 2/15 and 2/17).

Just like the single-user system of the operator system, the cen- tral engineering system of the SIMATIC PCS 7 process control system is based on the single station version of a SIMATIC PCS 7 industrial workstation. This is characterized by powerful PC technology combined with the Windows XP Professional op- erating system. It can be used in offices or industrial environ- ments.

One process monitor can be connected to the integral graphics interface. Increased user-friendliness can be achieved by con- necting up to 4 process monitors using a special multi-VGA graphics card.

■Design

The hardware platform for the engineering system of the SIMATIC PCS 7 process control system is the SIMATIC PCS 7 Industrial Workstation of single station design. This is based on the SIMATIC Rack PC 547B and is already prepared for installa- tion in 19" rack systems.

The SIMATIC PCS 7 Industrial Workstation of single station de- sign is available in two versions which differ in their communica- tions interface to the Industrial Ethernet plant bus:

•SIMATIC PCS 7 ES/OS RACK PC 547B BCE WXP FastEthernet connection to plant bus with 10/100/1000 Mbit/s RJ45 network card and Basic Communication Ethernet (BCE) for communication with up to 8 automation systems (not fault- tolerant)

•SIMATIC PCS 7 ES/OS RACK PC 547B IE WXP

FastEthernet connection to plant bus with CP 1613 communi- cations processor (without limitations)

The CP 1613 communication integrated in the IE version SIMATIC PCS 7 ES/OS RACK PC 547B IE WXP is a combination of CP 1613 communications processor and S7-1613 communi- cations software. When using fault-tolerant automation systems, the ES/OS single station requires the S7-REDCONNECT soft- ware instead of the S7-1613 communications software. The

S7-REDCONNECT Upgrade is suitable for upgrading the com- munications software (for ordering data, see page 9/29).

The Windows XP Professional operating system and the SIMATIC PCS 7 engineering software for AS/OS are preinstalled on the SIMATIC PCS 7 Industrial Workstation on delivery. The scope of performance of the preinstalled SIMATIC PCS 7 engi- neering software is defined by installation of the purchased soft- ware licenses.

A 10/100/1000 Mbit/s Ethernet RJ45 port is already onboard and can be used for connecting to an OS LAN (terminal bus).

Options/expansions

A multi-VGA card can be added to the engineering system. 2 or 4 monitors can then be connected per station (see Section "SIMATIC PCS 7 Industrial Workstation" in Chapter "System- neutral components").

■Technical specifications4

Detailed technical data of the single station version of the SIMATIC PCS 7 Industrial Workstation can be found at page 2/12 in tabular format.

■Selection and Ordering Data		Order No.
Single station
Windows XP Professional MUI
	operating system
	(German, English, French, Italian,
	Spanish, Chinese)
	• SIMATIC PCS 7 ES/OS 547B	6ES7 650-0NF07-0YX0	D)
	BCE WXP
	Connection to plant bus with
	Ethernet network card RJ45
	(PCI) 10/100/1000 Mbit/s and
	Basic Communication Ethernet
	(BCE) for up to 8 automation
	systems (not H-systems)
• SIMATIC PCS 7 ES/OS 547B		6ES7 650-0NF07-0YX1	D)
	IE WXP
	Connection to plant bus with
	CP 1613 A2 communications
	processor

Additional and expansion components

SIMATIC NET S7-REDCONNECT

Upgrade

for communication with fault-toler- ant AS systems, see page 9/28

Further additional and expansion components can be found at page 2/15

D) Subject to export regulations: AL: N, ECCN: 5D992B1

Note:

Ordering data in abbreviated form; for detailed Ordering data, see page 2/14

Siemens ST PCS 7 · November 2007

4/3