Siemens ST PCS 7 manual 10/5, Design and equipment features

© Siemens AG 2008

Automation systems

Microbox automation system

Two Ethernet interfaces 10/100/1000 Mbit/s (RJ45) are inte- grated in the SIMATIC PCS 7 AS RTX for plant bus communica- tion with SIMATIC PCS 7 subsystems such as operator system, engineering system or maintenance station.

ET 200M, ET 200ISP and ET 200S I/O stations can be linked over a PROFIBUS DP interface to a comprehensive range of low- cost signal/function modules as well as intelligent field/process devices on the PROFIBUS PA.

The SIMATIC PCS 7 AS RTX is configured using the central en- gineering system of the SIMATIC PCS 7 process control system.

The engineering system also administers the AS Runtime li- censes of the SIMATIC PCS 7 AS RTX. The scope of delivery of the SIMATIC PCS 7 AS RTX already includes an AS Runtime license for 250 POs. This can be expanded by further AS Run- time licenses for 100 POs. The process objects of additional AS Runtime licenses are then added to process objects which already exist.

■Technical specifications

SIMATIC PCS 7 AS RTX

Design and equipment features

Design	DIN rail or wall mounting;
	horizontal (preferred) or vertical
Degree of protection to EN 60529	IP20
(front/rear)
CPU
• Processor	Intel Pentium M 1.4 GHz
• Front Side Bus	400 MHz
• Second Level Cache	2 MB
Chipset	Intel Alviso 910GML
Main memory	1 GB DDR2-SDRAM (SO-DIMM
	modules)
Graphics
• Graphics controller	Intel 2D/3D GMA900, integrated
	in chipset
• Graphics memory	Dynamic video memory 8 to
	128 MB
• Resolutions/colors/frequencies
- CRT	Up to 1600 x 1200 / 32 bit colors /
	60 to 120 Hz
- DVI	Up to 1600 x 1200 / 32 bit colors
Drives
• Flash drive	For CompactFlash card, 2 GB
• CD-ROM / DVD-RW / diskette	Connectable via USB (not
	included in scope of delivery)

■Technical specifications

Interfaces
• PROFIBUS/MPI	12 Mbit/s (electrically isolated,
	CP 5611-compatible), 9-contact
	Sub-D socket
• Ethernet	2 x 10/100/1000 Mbit/s (RJ 45),
	two independent controllers
• USB	4 x USB 2.0/high-speed
• Serial	1 x COM1 (V.24), 9-contact Sub-D
	connector
• Parallel	-
• Graphics connection	1 x DVI-I (DVI/VGA combined):
	• DVI: digital
	• VGA analog
• Keyboard/mouse	Connectable via USB (not
	included in scope of delivery)
LED displays	• Power
	• Watchdog
Operating system / basic software
Operating system	Windows XP Embedded prein-
	stalled on CompactFlash card
	(CF card) 2 GB, no activation
	required
System-tested SIMATIC industrial	WinAC RTX
software	DiagMonitor
Monitoring/diagnostics functions
Watchdog	• Monitoring of program execution
	• Restart can be parameterized
	following faults
	• Monitoring time adjustable in the
	software
Temperature	• Processor	10
	• Motherboard
	(via SIMATIC PC DiagMonitor and
	SIMATIC PCS 7 Asset Manage-
	ment)
Operating hours counter	(via SIMATIC PC DiagMonitor and
	SIMATIC PCS 7 Asset Manage-
	ment)
Safety
Protection class	Protection class I compliant with
	IEC 61140
Safety directives	EN 60950-1; UL 60950;
	CAN/CSA-C22.2 No. 60950-1;

UL 508; CAN/CSA-C22.2 No. 142 or CAN/CSA-C22.2 No. 14-05

Noise level

Operation < 40 dB (A) to DIN 45635-1

Siemens ST PCS 7 · Update November 2008

10/5