Teledyne GFC 7001EM Setup DAS EDIT Accessing the Idas Edit Mode, Conc ATIMER, 1, Channel No

Advanced Features Model GFC7001E Carbon Dioxide Analyzer

7.1.5.SETUP DAS EDIT: ACCESSING THE IDAS EDIT MODE

iDAS configuration is most conveniently done through the APICOM remote control program. The following list of key strokes shows how to edit the iDAS using the front panel.

When editing the data channels, the top line of the display indicates some of the configuration parameters.

For example, the display line:

0) CONC: ATIMER, 1, 800

Translates to the following configuration:

Channel No.: 0

NAME: CONC

TRIGGER EVENT: ATIMER

PARAMETERS: One parameter is included in this channel

EVENT: This channel is set up to store 800 records.

To edit the name of a data channel, follow the above key sequence and refer to Section 7.1.5.1:

Teledyne Analytical Instruments 112