Teledyne GFC 7001E Comm Port Password Security, Logon Is the default password, RS-232PASS=NNNNNN

Remote Operation Model GFC7001E Carbon Dioxide Analyzer

8.1.7.5.COMM Port Password Security

In order to provide security for remote access of the GFC 7001E/EM, a LOGON feature can be enabled to require a password before the instrument will accept commands. This is done by turning on the SECURITY MODE (Mode 4, Table 8-1.

Once the SECURITY MODE is enabled, the following items apply.

A password is required before the port will respond or pass on commands.

If the port is inactive for one hour, it will automatically logoff, which can also be achieved with the LOGOFF command.

Three unsuccessful attempts to log on with an incorrect password will cause subsequent logins to be disabled for 1 hour, even if the correct password is used.

If not logged on, the only active command is the '?' request for the help screen.

The following messages will be returned at logon:

LOGON SUCCESSFUL - Correct password given

LOGON FAILED - Password not given or incorrect

LOGOFF SUCCESSFUL - Connection terminated successfully

To log on to the GFC 7001E/EM Analyzer with SECURITY MODE feature enabled, type:

LOGON 940331

NOTE

940331 is the default password.

To change the default password, use the variable RS-232_PASSissued as follows:

V RS-232_PASS=NNNNNN

Where N is any numeral between 0 and 9.

Teledyne Analytical Instruments 159