Optional Hardware and Software

Model GFC7001E Carbon Dioxide Analyzer

5.OPTIONAL HARDWARE AND SOFTWARE

This includes a brief description of the hardware and software options available for the GFC 7001E/EM Gas Filter Correlation Carbon Monoxide Analyzer. For assistance with ordering these options please contact the Sales department of Teledyne Analytical Instruments at:

TELEDYNE ELECTRONIC TECHNOLOGIES

Analytical Instruments

16830 Chestnut Street

City of Industry, CA 91748

Telephone: (626) 934-1500

Fax: (626) 961-2538

Web: www.teledyne-ai.com

5.1.EXTERNAL PUMPS (OPTIONS 10A-10E, 11, 13)

A variety of optional pumps are available for the GFC 7001E/EM Analyzer. The range of available pump options meets all typical AC power supply standards while exhibiting the same pneumatic performance.

OPTION

DESCRIPTION

NUMBER

 

10A

External Pump 115V @ 60 Hz

 

 

10B

External Pump 220V @ 50 Hz

10C

External Pump 220V @ 60 Hz

10D

External Pump 100V @ 50 Hz

10E

External Pump 100V @ 60 Hz

 

 

11

Pumpless, external Pump Pack/Rack

13High Voltage Internal Pump 240V/50Hz

5.2.RACK MOUNT KITS (OPT 20 TO OPT 23)

There are several options for mounting the analyzer in standard 19” racks. The slides are three-part extensions, one mounts to the rack, one mounts to the analyzer chassis and the middle part remains on the rack slide when the analyzer is taken out. The analyzer locks into place when fully extended and cannot be pulled out without pushing two buttons, one on each side.

The rack mount brackets for the analyzer require that you have a support structure in your rack to support the weight of the analyzer. The brackets cannot carry the full weight of an analyzer and are meant only to fix the analyzer to the front of a rack, preventing it from sliding out of the rack accidentally.

OPTION NUMBER

DESCRIPTION

20A

Rack mount brackets with 26 in. chassis slides.

 

 

20B

Rack mount brackets with 24 in. chassis slides.

 

 

21

Rack mount brackets only.

23

Rack Mount for External Pump Pack (No Slides).

Each of these options permits the analyzer to be mounted in a standard 19" x 30" RETMA rack.

Teledyne Analytical Instruments

61

Page 61
Image 61
Teledyne GFC 7001E Optional Hardware and Software, Rack Mount Kits OPT 20 to OPT, Model GFC7001E Carbon Dioxide Analyzer