Texas Instruments PCI7411, PCI7611, PCI7621, PCI7421 manual Recommended Operating Conditions

Recommended Operating Conditions (continued)

				OPERATION	MIN	NOM	MAX	UNIT
		PCIk		3.3 V	0.5 VCCP		VCCP
				5 V	2		VCCP
				3.3 V CardBus	0.475 VCC(A/B)		VCC(A/B)
VIH†	High-level input	PC Card		3.3 V 16-bit	2		VCC(A/B)	V
	voltage			5 V 16-bit	2.4		VCC(A/B)
		PC(0−2)			0.7 VCC		VCC
		Miscellaneous‡			2		VCC
		SC_DATA, SC_FCB, SC_RFU			0.6 SC_VCC_5V		SC_VCC_5V
		PCIk		3.3 V	0		0.3 VCCP
				5 V	0		0.8
				3.3 V CardBus	0		0.325 VCC(A/B)
V †	Low-level input	PC Card		3.3 V 16-bit	0		0.8	V
IL	voltage			5 V 16-bit	0		0.8
		PC(0−2)			0		0.2 VCC
		Miscellaneous‡			0		0.8
		SC_DATA, SC_FCB, SC_RFU			0		0.5
		PCIk			0		VCCP
VI	Input voltage	PC Card			0		VCC(A/B)	V
		Miscellaneous‡			0		VCC
		SC_DATA, SC_FCB, SC_RFU			0		SC_VCC_5V
		PCIk			0		VCC
V §	Output voltage	PC Card			0		VCC	V
O		Miscellaneous‡			0		VCC
		SC_CLK, SC_DATA, SC_FCB, SC_RFU, SC_RST			0		SC_VCC_5V
	Input transition time	PCI and PC Card			1		4
t		Miscellaneous‡			0		6	ns
t	(tr and tf)
		SC_DATA, SC_FCB, SC_RFU			0		1200
IO	Output current	TPBIAS outputs			−5.6		1.3	mA
VID	Differential input	Cable inputs during data reception			118		260	mV
	voltage	Cable inputs during arbitration			168		265
VIC	Common-mode	TPB cable inputs, source power node			0.4706		2.515	V
	input voltage	TPB cable inputs, nonsource power node			0.4706		2.015¶
tPU	Powerup reset time		input		2			ms
		GRST

†Applies to external inputs and bidirectional buffers without hysteresis

‡Miscellaneous terminals are A03, B17, C15, C18, E05, E08, F19, H03, J01, J02, J03, J05, J06, J07, L02, L03, L05, M01, M02, M03, N01, N02, N13, P12, P15, R02, R17, T01 (A_CCDx, A_CDx, A_CVSx, A_VSx, B_CCDx, B_CDx, B_CVSx, B_VSx, SD_DAT0, SD_DAT2, SD_DAT3, SD_CMD, SD_CLK, SD_DAT1, SM_CLE, SC_CD, SC_OC, SC_PWR_CTRL, CLK_48, SDA, SCL, DATA, LATCH, TEST0, CNA, SUSPEND,

PHY_TEST_MA, and GRST terminals). § Applies to external output buffers

¶ For a node that does not source power, see Section 4.2.2.2 in IEEE Std 1394a−2000.

#These junction temperatures reflect simulation conditions. The customer is responsible for verifying junction temperature. kMFUNC(0:6) share the same specifications as the PCI terminals.

14−2