Toshiba 4511, 3511 - page 226

e-STUDIO3511/4511 ADJUSTMENT 3 - 36 November 2003 © TOSHIBA TEC
3.6.4 Adjustment of smudged/faint text
The smudged/faint text at the Black Mode is adjusted.
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in the codes to be adjusted and press the [START] button.
(3) Key in the adjustment value. (To correct the value once keyed in, press [CLEAR] button.)
(4) Press the [ENTER] or [INTERRUPT] button to store the value in memory. → The equipment goes
back to the ready state.
(5) For resetting the value, repeat step (2) to (4).
(6) Let the equipment restart and perform printing job.
(7) If the desired image has not been attained, repeat step (1) to (6).
3.6.5 Upper limit value at Toner Saving Mode
The upper limit value is adjusted at the Toner Saving Mode.
PS
654
Remarks
When the value increases, the smudged text is improved.
When the value decreases, the faint text is improved.
Acceptable values: 0 to 9 (Default: 5)
Language
PCL
655
<Procedure>
Procedure is same as that of “3.6.4 Adjustment of smudged/faint text”.
PS
664
PCL
665
PS
1200x600dpi
1056
PS
600x600dpi
1055
Remarks
The smaller the value is, the lighter
the density of image becomes.
Acceptable values: 0 to 255.
(Default: 176)
PCL
600x600dpi
1057
PCL
1200x600dpi
1058
Black mode Color mode
<Adjustment Mode (05)>
<Adjustment Mode (05)>