Toshiba 4511, 3511

November 2003 © TOSHIBA TEC 3 - 47 e-STUDIO3511/4511 ADJUSTMENT

(2) Adjusting carriages-1 and -2 positions

a. Move the carriage-2 toward the exit side.

b. Loosen the screws fixing the front side pulley bracket, make the sections A and B of the

carriage-2 touch with the inside of the exit side frame and screw them up.

Fig. 3-902

c. Put the carriage-1 on the rail, make the sections C and D of it touch with the inside of the exit

frame and screw up the front/rear side of the bracket to fix it.

Note:

Make sure that the sections A and B of the carriage-2 touch with the exit side frame.

Carriage-2 Pulley bracket

Exit side frame

Carriage-1

Exit side frame

Bracket Bracket

[Rear] [Front]

Enlarged view of carriage

Fig. 3-903