Toshiba 4511, 3511

e-STUDIO3511/4511 FIRMWARE UPDATING 6 - 22 November 2003 © TOSHIBA TEC

(a) Update Procedure

Since the procedure differs depending on the data, see the each procedure below.

Important:

• Turn OFF the power before installing or removing the download jig.

• Do not turn OFF the power during the update. The data could be damaged and not be operated

properly.

(1) Install the ROM to the download jig.

Make sure the direction is correct ( Page 6-3).

(2) Turn OFF the power of the equipment.

(3) Take off the connector cover.

Connector cover

Cover plate

(4) Remove the cover plate.