e-STUDIO3511/4511 ADJUSTMENT 3 - 94 November 2003 © TOSHIBA TEC
05/03
• If the transfer belt contacts with the front regulation plate or the gap between the transfer belt
and the rear regulation plate is less than 0.2 mm, rotate the adjustment screw counterclock-
wise (viewing from below) five-sixth turn.
Less than 0.2mm
Adjustment screw
Fig. 3-1607
Note:
• Do not rotate the adjustment screw counterclockwise (viewing from below) 2.5 turns or more.
The screw may come off.
• Before turning the adjustment screw, make a mark on the reference face and a note of the
turning direction of the screw and the number of turning faces. These preparations make the
adjustment efficient.
• To readjust the screw according to the result of step (13), follow the turns in the list blew.
Number of adjustment
Number of turns
1st
5/6 turn
Readjustment
Result A
Result B
2nd
5/6 turn
2/6 turn
3rd
5/6 turn
1/6 turn
4th
-
1/6 turn