e-STUDIO3511/4511
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 132 November 2003 © TOSHIBA TEC1371
1372
1378
1380
1382
1385
1386
1387
1388
1389
1390
1391
Image
process-
ing
Image
process-
ing
Image
process-
ing
Image
process-
ing
Image
process-
ing
Image
process-
ing
Image
process-
ing
Image
process-
ing
Image
process-
ing
Main
charger
Paper
feeding
Paper
feeding
Accumulated counter of
output pages since the
performing of image quality
control
Heater and energizing time
accumulating counter
Display/0 clearing
Fuser roller ready
temperature time
accumulating counter
Fuser roller printing
temperature time
accumulating counter
Fuser roller energy saving
temperature time
accumulating counter
Display/0 clearing
Number of output pages
(Thick paper 1)
Number of output pages
(Thick paper 2)
Number of output pages
(Thick paper 3)
Number of output pages
(OHP film)
Main charger wire cleaning
counter display/0 clearing
Feeding retry counter
(upper drawer)
Feeding retry counter
(lower drawer)
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
0
<4 digits>
0
<8 digits>
0
<8 digits>
0
<8 digits>
0
<8 digits>
0
<8 digits>
0
<8 digits>
0
<8 digits>
0
<8 digits>
0
<5 digits>
0
<8 digits>
0
<8 digits>
Cleared to “0” by the image quality
closed-loop control. Counts up with
the number of printing job received
after this control.
Counts up the heater control time
accumulated (when power of the copier
is ON) but does not count at the Sleep
Mode. When the counter value of the
fuser belt is cleared, this counter value is
also cleared in sync at PM support mode.
Counts up the heater control time
accumulated (on standby). When the
counter value of the fuser belt is
cleared, this counter value is also
cleared in sync at PM support mode.
Counts up the heater control time
accumulated (during printing). When
the counter value of the fuser belt is
cleared, this counter value is also
cleared in sync at PM support mode.
Counts up the heater control time
accumulated (at energy saving
mode). When the counter value of
the fuser belt is cleared, this counter
value is also cleared in sync at PM
support mode.
Counts up when the registration
sensor is ON. When the counter
value of the fuser belt is cleared, this
counter value is also cleared in sync
at PM support mode.
Counts up when the registration
sensor is ON. When the counter
value of the fuser belt is cleared, this
counter value is also cleared in sync
at PM support mode.
Counts up when the registration
sensor is ON. When the counter
value of the fuser belt is cleared, this
counter value is also cleared in sync
at PM support mode.
Counts up when the registration
sensor is ON. When the counter
value of the fuser belt is cleared, this
counter value is also cleared in sync
at PM support mode.
Does not count up when cleaning is
not effective.
Counts the number of times of the
feeding retry from the upper drawer.
Counts the number of times of the
feeding retry from the lower drawer.
M
M
M
M
M
M
M
M
M
M
M
M
2
1
2
2
2
1
1
1
1
1
1
1
Setting mode (08)
Code Classifi-
cation Items Func-
tion
Default
<Acceptable
value> RAM Contents Proce-
dure
04/09