Direction, Black F00, Magenta F00, Cyan F05 | Toshiba CB-416-T3-QQ

Appendix 5

System Mode

A5.4 Parameter Setting (Cont.)

Adjusting the Alignment in the X Direction (K, M, C and Y)

HEAD ADJUST

Notes:

∙Use the FEED or RESTART key to select a desired value or option.

∙Use black as the reference color. However, black can be aligned in the same manner as the other three colors.

Note:

When G or H is selected, the acceptable values are 01 to 29.

Notes:

∙Use the FEED or RESTART key to select a desired value or option.

∙Use black as the reference color. However, black can be aligned in the same manner as the other three colors.

Press the PAUSE key. “HEAD ADJUST” appears. Then press the PAUSE key again.

X DIRECTION

The X direction alignment is ready for adjustment. Press the PAUSE key.

BLACK F00

Press the PAUSE key twice.

MAGENTA F00

Align magenta in the X direction. Select one of the following letters for the best alignment: E, F, G or H.

When selecting the letter, press the PAUSE key.

MAGENTA F00

Next enter the value within a range of 00 to 31 for the best alignment.

After selecting the value, press the PAUSE key.

CYAN F05

Then make alignments for the other two colors in the same manner in order of cyan and yellow.

When the alignments are complete, the message returns to “<2>

PARAMETER SET”.

Adjusting the Alignment in the Y Direction (K, M, C and Y)

HEAD ADJUST

Press the PAUSE key. “HEAD ADJUST” appears. Then press the PAUSE key again.

Y DIRECTION

The Y direction alignment is ready for adjustment. Press the PAUSE key.

BLACK B00

Press the PAUSE key twice

BLACK B05

To align magenta in the Y direction. Select one of the following letters for the best alignment: A, B, C or D.

After selecting the letter, press the PAUSE key.

97

Image 105

Toshiba CB-416-T3-QQ owner manual Direction, Black F00, Magenta F00, Cyan F05, Black B00, Black B05

Contents

CB-416-T3-QQ For Canada onl y Safety Precautions Safety SummaryMeanings of Symbols Any other than the specified AC voltage is prohibited Iii Request Regarding Maintenance Table Contents of Contents TOC Product Overview Introduction Features Unpacking Accessories Accessories and Options Cool Release Enhancement KitOptions Appearance DimensionsFront View Rear View Interior Operation Panel Installing the Accessories Printer InstallationFan Filters Media Slide Connecting the Printer to Your Computer Connecting the Power Cord Turning on the Printer Turning on/off the Printer Printer Turning off Loading the Media Measure width of the media that will be loaded Slide the Supply Roll Holder inside to the loaded media RightWrong Side View of the Printer Top View of the Printer Information Additional Black Mark Sensor Sensor Adjustments Feed Gap Sensor Media Sensor Adjustor AdjustmentBlack Mark Sensor Sensitivity Adjustment Media Sensor Open the Top Cover Loading the Ribbons For Hot Release Loading ProcedureRibbon Positions Ribbon Width Media Width Loading Procedure Ribbon Module Print Head Block Part Name Quantity Loading the Ribbons Installing the Ribbon Plate Installing the SP Ribbon GuidesThem in the direction of the arrow Installing the Ribbon Tension Sheet Loading the Cold Release Ribbons Printing Installation Procedure For Windows98System Requirements Preparation Click Next Installation Chapter Printing To continue the setup Installation Procedure Adding the Printer For Windows98 Click Have Disk ∙ The ECPPrinter port is recommended Uninstalling the Printer Driver Chapter Properties Displaying PrinterProperties This is a summary of the main properties for CB-416-T3 Summary of Properties Selecting a label size Setup User Defined cannot be renamed Creating a new label size ∙ a preview will be shown, as each option is selected Orientation Miscellaneous User Commands Transfer Mode Print Density Adjustment Tab Settings See SectionPrinting Preferences Name Click Export. The Save Devices Settings File screen appears To enable the saved settings, use the following procedures Click Import. The Open Device Settings File screen appearsCont Dithering Graphics Color IntensityColor Registration Click Color Registration on the Graphics property Y5 in Vertical Y on Align Color Yellow/Black Color 0 Yellow Sample Spot Color Setup Spot Color Printing Bar Fonts Specifying a New Font Style Font Style Print Method StockSensor Label Gap Issue Settings Fine Adjustment Transfer Mode Print Density AdjustmentOptions Device Settings MaintenanceRibbon Settings Testing Print Test Label ResetFeed Cut Procedures Click Print Test Label on the Device Settings propertyPrint Test On the File menu, click Print Printing a Label Printing a Label Printing a Label Online Mode Illuminates when Flashes whenOperation Panel Operation ResetOn Line No Paper Maintenance CleaningPrint Head/Platen Pinch Roller/Feed Roller/Media Guide Turn off the printer. Unplug the power cord Ribbon Modules Covers and Panels Troubleshooting Error MessagesError Messages Problems/Causes Solutions Switch to the right Back Tension Possible Problems Causes Solutions Possible Problems From the Print Head Block From the Pinch Roller Unit When the Ribbon is Torn Apart Appendix 1 Specifications A1.1 PrinterModel CB-416-T3-QQ Name Model Description A1.2 Options A1.3 MediaA1.3.1 Media Type Label Tag Below A1.3.2 Detection Area of the Transmissive Sensor A1.3.3 Detection Area Reflective SensorA1.3.4 Effective Print Area Type Spool Type A1.4 Ribbon Appendix 2 DIP Switches Function A2.1 DIP Switch a OFF Even A2.2 DIP Switch B A2.3 Ribbon Near End Detection Issue Mode Settings Label SettingsAppendix 3 Quick Reference for Printing Actions Path to Find the Property See Section Actions Path to the Property See Section Other Settings Function See Section Remarks TAB Appendix 4 Message and LED Symbols in the MessageLED Indication LCD Messages Printer Status ` YES Message and LED A5.1 Operation Panel Appendix 5 System Mode A5.2 Overview 2PARAMETER SET 3TEST Print4RAM Clear Auto Diagnostic A5.3 Self-Diagnostic TestMaintenance Sensor None Head Error KMC A5.4 Parameter SettingHead Check Checking Position A5.4 Parameter Making Positional Adjustments Black Print DensityMagenta +0 CYAN+3 Issue Count Head AdjustPrint Condition Print Speed 6/S Printing the X/Y Direction Alignment Caliper-shaped Pattern Adjust Black F00 DirectionMagenta F00 Cyan F05 Cyan B05 Magenta B00Check Printer Para Code Auto PM AdjustPulse Motor Auto Euro Code Black on Head SelectMagenta on Ribbon A5.5 Test Print Specifying the Print Condition for the Test PrintPause key again Quality High Types no CUTPaper Feed Printing out the Slant Line Pattern Color Slant LinemCharacters Barcode No RAM Clear A5.6 RAM ClearMainte CNT Clear Complete Clearing the Print Distance Print Step ClearALL Color Switch Check A5.7.1 Self-Diagnostic Test Result Sample and DescriptionsA5.7 Additional Information Memory Check Parameters Maintenance Counter A5.7.3 Cut Operation Example A5.7.5 X-Coordinate Fine AdjustmentA5.7.4 Pulse Motor Speed A5.7.6 Magnified Views of Slant Line Pattern Initial Value 110 111 Appendix 6 Interface