Magenta B00, Cyan B05, Check, Printer Para | Toshiba CB-416-T3-QQ

Appendix 5

System Mode

A5.4 Parameter Setting (Cont.)

Note:

When C or D is selected, the acceptable values are 01 to 29.

Note:

Use the FEED or RESTART key to select a desired value or option.

MAGENTA B00

Next enter the value within a range of 00 to 31 for the best alignment.

When entering the value, press the PAUSE key.

CYAN B05

Then make alignments for the other two colors in the same manner in the order of cyan and yellow.

When the alignments are complete, the message returns to “<2>

PARAMETER SET”.

Now verify that the X/Y direction alignment is correct.

HEAD ADJUST

Press the PAUSE key twice.

CHECK

Press the PAUSE key. The printer prints the X/Y Direction Alignment Test.

After printing completes, the message returns to “<2>

PARAMETER SET”.

Selecting the Printer Parameters

HEAD ADJUST

Press the PAUSE key.

After “HEAD ADJUST” appears, press the FEED key.

PRINTER PARA

The printer parameters are ready to be selected. Press the PAUSE key.

Specifying the Character Code

FONT CODE PC-850

Select the character codes: PC-850 or PC-8.

After selecting the code, press the PAUSE key.

Specifying Zero Font

ZERO FONT

0

Select whether a 0 (zero) with a slash or no slash will be used. After selecting the zero font, press the PAUSE key.

98

Image 106

Toshiba CB-416-T3-QQ owner manual Magenta B00, Cyan B05, Check, Printer Para, Font Code PC-850, Zero Font

Contents

CB-416-T3-QQ For Canada onl y Safety Summary Safety PrecautionsMeanings of Symbols Any other than the specified AC voltage is prohibited Iii Request Regarding Maintenance Table Contents of Contents TOC Introduction Features Unpacking Product Overview Accessories and Options Accessories Enhancement Kit Cool ReleaseOptions Front View DimensionsAppearance Rear View Operation Panel Interior Fan Filters Printer InstallationInstalling the Accessories Media Slide Connecting the Printer to Your Computer Connecting the Power Cord Turning on/off the Printer Turning on the Printer Turning off Printer Loading the Media Measure width of the media that will be loaded Slide the Supply Roll Holder inside to the loaded media RightWrong Top View of the Printer Side View of the Printer Additional Information Sensor Adjustments Black Mark Sensor Feed Gap Sensor Black Mark Sensor Sensitivity Adjustment AdjustmentMedia Sensor Adjustor Media Sensor Open the Top Cover Ribbon Positions Loading ProcedureLoading the Ribbons For Hot Release Ribbon Width Media Width Procedure Loading Ribbon Module Print Head Block Loading the Ribbons Part Name Quantity Installing the Ribbon Plate Ribbon Guides Installing the SPThem in the direction of the arrow Installing the Ribbon Tension Sheet Loading the Cold Release Ribbons System Requirements Installation Procedure For Windows98Printing Preparation Installation Click Next To continue the setup Chapter Printing Installation Procedure Adding the Printer For Windows98 Click Have Disk ∙ The ECPPrinter port is recommended Uninstalling the Printer Driver Chapter Displaying Printer PropertiesProperties Summary of Properties This is a summary of the main properties for CB-416-T3 Setup Selecting a label size Creating a new label size User Defined cannot be renamed Orientation ∙ a preview will be shown, as each option is selected User Commands Miscellaneous Printing Preferences Tab Settings See SectionTransfer Mode Print Density Adjustment Name Click Export. The Save Devices Settings File screen appears Click Import. The Open Device Settings File screen appears To enable the saved settings, use the following proceduresCont Graphics Dithering Color Registration IntensityColor Click Color Registration on the Graphics property Color 0 Yellow Sample Y5 in Vertical Y on Align Color Yellow/Black Spot Color Setup Spot Color Printing Bar Fonts Specifying a New Font Style Font Style Sensor StockPrint Method Label Gap Issue Settings Fine Adjustment Print Density Adjustment Transfer ModeOptions Maintenance Device SettingsRibbon Settings Feed ResetTesting Print Test Label Cut Click Print Test Label on the Device Settings property ProceduresPrint Test Printing a Label On the File menu, click Print Printing a Label Printing a Label Illuminates when Flashes when Online ModeOperation Panel On Line ResetOperation No Paper Cleaning MaintenancePrint Head/Platen Turn off the printer. Unplug the power cord Pinch Roller/Feed Roller/Media Guide Covers and Panels Ribbon Modules Error Messages TroubleshootingError Messages Problems/Causes Solutions Switch to the right Back Tension Possible Problems Possible Problems Causes Solutions From the Pinch Roller Unit From the Print Head Block When the Ribbon is Torn Apart A1.1 Printer Appendix 1 SpecificationsModel CB-416-T3-QQ A1.3.1 Media Type A1.2 Options A1.3 MediaName Model Description Label Tag A1.3.2 Detection Area of the Transmissive Sensor Below Reflective Sensor A1.3.3 Detection AreaA1.3.4 Effective Print Area A1.4 Ribbon Type Spool Type Appendix 2 DIP Switches A2.1 DIP Switch a Function A2.2 DIP Switch B OFF Even A2.3 Ribbon Near End Detection Appendix 3 Quick Reference for Printing Label SettingsIssue Mode Settings Actions Path to Find the Property See Section Other Settings Actions Path to the Property See Section TAB Function See Section Remarks LED Indication Symbols in the MessageAppendix 4 Message and LED LCD Messages Printer Status Message and LED ` YES Appendix 5 System Mode A5.1 Operation Panel A5.2 Overview 3TEST Print 2PARAMETER SET4RAM Clear Maintenance A5.3 Self-Diagnostic TestAuto Diagnostic Sensor None Head Check A5.4 Parameter SettingHead Error KMC Checking A5.4 Parameter Making Positional Adjustments Position Magenta +0 Print DensityBlack CYAN+3 Print Condition Head AdjustIssue Count Print Speed 6/S Adjust Printing the X/Y Direction Alignment Caliper-shaped Pattern Magenta F00 DirectionBlack F00 Cyan F05 Check Magenta B00Cyan B05 Printer Para Pulse Motor Auto PM AdjustCode Auto Euro Code Magenta on Head SelectBlack on Ribbon Specifying the Print Condition for the Test Print A5.5 Test PrintPause key again Paper Feed Types no CUTQuality High Printing out the Slant Line Pattern Characters Slant LinemColor Barcode Mainte CNT Clear A5.6 RAM ClearNo RAM Clear Complete Print Step Clear Clearing the Print DistanceALL Color A5.7 Additional Information A5.7.1 Self-Diagnostic Test Result Sample and DescriptionsSwitch Check Memory Check Maintenance Counter Parameters A5.7.4 Pulse Motor Speed A5.7.5 X-Coordinate Fine AdjustmentA5.7.3 Cut Operation Example A5.7.6 Magnified Views of Slant Line Pattern Initial Value 110 111 Appendix 6 Interface