Thank you for choosing the TOSHIBA TEC CB-416-T3 color printer. This Owner’s Manual describes printer setup and installation procedures, printer properties, settings and adjustments, and maintenance information. Thus it should be read carefully to help gain maximum performance and life from the printer. For further information please refer to this manual and keep it safe for future reference.
The CB-416-T3 color printer has the following features:
∙High-speed, quality printing. The printer utilizes Edge Heads that support the high-performance Hot Release Ribbons to produce a maximum print speed of approximately 6 in/s (150 mm/s). In addition, the Cool Release Enhancement Kit is supplied as an accessory, and allows the popular Cold Release Ribbons to be loaded.
∙Fine, sharp color printing. The printer utilizes four high-resolution (305 dpi) print heads, and uses both basic process color ribbons of yellow, cyan, magenta and black to produce up to 260,000 colors, and a variety of spot color ribbons for solid printing.
∙A variety of printer fonts and bar code fonts are built into the printer to help create a unique colored label.
∙Cost efficiency. The automatic ribbon saver is standard and allows for conservation of individual ribbons. In addition, the media back feed capability allows you to avoid wasting the media.
Unpack the printer as per the Unpacking Instructions packed with the printer.
Important!
∙Check for damage or scratches on the printer.
However, please note that TOSHIBA TEC shall have no liability of any damage of any kind sustained during transportation of the product.
∙Keep the cartons and pads for future transportation of the printer.
