Chapter 2 Printer Installation
2.5Loading the Media (Cont.)
Notes:
∙Pass the media straight from the Supply Holder Unit to the Media Outlet to avoid skewing.
∙Use the marks at the Media Slide and the Media Outlet so that the media can be centered.
∙Be sure to take up any slack in the media.
18Feed the media to the Media Outlet manually until its leading edge comes out of the Media Outlet.
(Top View of the Printer)
Media Guide
Media
Media Outlet | Print Head Blocks | Media Inlet | Supply Roll | |
Holder | ||||
|
|
|
(Side View of the Printer)
Print Head Blocks
Media
Right
Pinch Roller
Note:
Push down the Pinch Roller Unit gently on the “PUSH HERE” label.
Print Head Blocks | Pinch Roller |
Wrong
Media
19Push down the Pinch Roller Unit until it is hooked. Then push
down the Pinch Roller Lever to the ROLLER LOCK position.
[PUSH HERE]
Pinch Roller Lever
(To ROLLER LOCK)
20Reinstall the Supply Shaft Holder Stand to the Supply Shaft Holder, whose level is adjusted in Steps 3 to 5.
Supply Shaft Holder Stand
15
