Appendix 5 System Mode
107
A5.7.2 Maintenance Counter/Parameter Check Print Sample and Descriptions
1 Maintenance Counter
•Total label distance covered (cannot be cleared)
•Label distance covered
•Print distance (Y, M, C, K)
•Cut count
•Head-up/down count (Y, M, C, K)
•Ribbon motor drive time (Y, M, C, K)
•RS-232C hardware error count
•Momentary power interruption count
2 Parameters
•Print start position fine adjustment value
•Cut position fine adjustment value
•Back feed fine adjustment value
•Stop position fine adjustment value
•X direction fine adjustment value (for adjustment before shipment from the factory)
(Y, M, C, K)
•Y direction fine adjustment value (for adjustment before shipment from the factory)
(Y, M, C, K)
•Print density fine adjustment value (Thermal transfer)
(Y, M, C, K)
•X-coordinate fine adjustment value
•Character code type
•Font “0”
•Control code type