
Chapter 3 | Printing |
3.10Printing a Label (Cont.)
Note:
Only five property pages are available in the application programs: Page Setup, Graphics, Stock, Options, and About.
Note:
If the ERROR LED flashes or illuminates, and an error message appears on the printer’s Message Display, an error has occurred. Please see Chapter 6 to take the proper action.
3Be sure to check the following in each property page before printing:
∙Label size and orientation. See Section 3.3 for more detail.
∙Dithering and intensity. See Section 3.4 for more detail.
∙Print method, sensor, label gap, issue mode, print method, fine adjustment, and so on. See Sections 3.6 for more detail.
∙Print density adjustment. See Section 3.7 for more detail.
When finished checking the property pages, click OK to return to the Print dialog.
4Set Print range and Number of copies, and click OK to start printing the label.
∙The ON LINE LED flashes when the printer is communicating with your computer.
∙The ON LINE LED illuminates while printing.
5This completes printing a sample label.
62