Appendix 5

System Mode

A5.4 Parameter Setting (Cont.)

X-Coordinate (-99.5mm to +99.5mm)

X Y Z

-+

Note:

See A5.7.5 for more detail.

Notes:

Use the FEED key for lighter density, or the RESTART key for darker density.

The acceptable print density values are -50 to +50.

The print density value is +0 at shipment from the factory.

X ADJUST +50.0mm

Adjust the X-coordinate.

After entering the value, press the PAUSE key. The message

returns to “<2> PARAMETER SET”.

Adjusting Print Density (K, M, C and Y)

POSITION

Press the PAUSE key. “POSITION” appears. Press the FEED key.

PRINT DENSITY

Print density adjustments are ready to be set. Press the PAUSE key.

BLACK -1

Adjust the print density of black.

After selecting the value, press the PAUSE key.

MAGENTA +0

Adjust the print density of magenta.

After selecting the value, press the PAUSE key.

CYAN+3

Adjust the print density of cyan.

After selecting the value, press the PAUSE key.

YELLOW +0

Adjust the print density of yellow.

After selecting the value, press the PAUSE key.

When the values for all colors are entered, press the PAUSE key. The message returns to “<2> PARAMETER SET”.

94

Page 102
Image 102
Toshiba CB-416-T3-QQ owner manual Print Density, Black, Magenta +0, CYAN+3, Yellow +0