Chapter 3 | Printing |
3.3.4Miscellaneous (Cont.)
Note:
Regardless of whether the Set Check box is marked or not, the shaded area will be enabled when saved as the preferred settings.
See Sections 3.6.5 and 3.7.2 for more detail.
Printing Preferences
∙In Printing Preferences, the preferred settings can be saved in the file for a particular print job. If several kinds of print jobs are performed, it is strongly recommended to use this function to save the preferred settings in the file for each print job.
When using Printing Preferences, the following settings can be saved. For more details of each setting, see the section indicated in the right column of the table below.
Tab | Settings | See Section ... | |
|
|
| |
| Name | 3.3.1 | |
Page Setup |
|
| |
Orientation | 3.3.3 | ||
| User Commands | 3.3.4 | |
Graphics | Dithering | 3.4.1 | |
Color Control | 3.4.3 | ||
| |||
| Print Method | 3.6.1 | |
| Sensor | 3.6.2 | |
| Label Gap | 3.6.3 | |
| Issue Mode |
| |
Stock | Cut | 3.6.4 | |
| Cut Interval |
| |
| Feed (Fine Adjustment) |
| |
| Back feed (Fine Adjustment) | 3.6.5 | |
| Cut/Strip (Fine Adjustment) |
| |
Options | Transfer Mode | 3.7.1 | |
Print Density Adjustment | 3.7.2 | ||
| |||
| (YMCK) | ||
|
| ||
|
|
|
43
