Chapter 2 Printer Installation
2.5Loading the Media (Cont.)
Note:
When inserting a roll of labels or tags, push on the media core only. Otherwise, core material drags against the Supply Shaft causing telescoping of the media supply roll.
11Based on width of the media measured in Step 10, push the media into the Supply Roll Holder (inside), and place it with reference to the marks on the Supply Shaft.
∙Loading a roll of labels
Supply Shaft
Labels
∙Loading a roll of tags
Supply Shaft
Tags
CAUTION!
To remove the Supply Roll Holder (outside), turn it to disengage the claw from the notches. Otherwise, the claw or the notches may be damaged. See Section 2.5.1 for more detail.
12Slide the Supply Roll Holder (inside) to the loaded media.
Supply Roll Holder
13Slide the Supply Roll Holder (outside) to the loaded media.
Notches
| Claw |
Supply Shaft | Supply Roll Holder |
(Outside) |
13
