|
|
|
| Appendix A4 | Message and LED | ||
|
|
| LED Indication |
| Restoration | Acceptance of | |
No. | LCD Messages | Printer Status | Status Request | ||||
| by RESTART | ||||||
|
|
| POWER ONLINE ERROR |
| key Yes/No | Reset Command | |
|
|
|
| Yes/No | |||
17 | FLASH WRITE ERR. |
| An error has occurred while writing | YES | |||
| to flash memory | NO | |||||
|
|
|
|
|
| ||
18 | FORMAT ERROR |
| An erase error has occurred in | YES | |||
| formatting the flash memory. | NO | |||||
|
|
|
|
|
| ||
19 | FLASH CARD FULL |
| Data cannot be stored because the | YES | |||
| flash memory is full. | NO | |||||
|
|
|
|
|
| ||
20 | NO RIBBON | ####* |
| The ribbon has run out. | YES | YES | |
21 | HEAD ERROR | * |
| There is a problem with the print | YES | ||
| head. | YES | |||||
|
|
|
|
|
| ||
22 | STACK OVERFLOW |
| The Stacker is full. | YES | YES | ||
23 | STACKER ERROR |
| Printing was attempted with the | YES | |||
| Stacker turned OFF. | YES | |||||
|
|
|
|
|
| ||
| Display of error message |
| A command error has occurred in | ` YES | |||
24 | (See Notes.) |
|
| analyzing the command. | YES | ||
Notes:
∙If a command error is found in the command received, 16 bytes of the command error, starting from the command code, will be displayed. (However, [LF] and [NUL] will not be displayed.)
Example 1
[ESC] T20 E60 [LF] [NUL] 
Command error
The following message appears.
T20E60
Example 2
[ESC] XR; 0200, 0300, 0450, 1200,1 [LF] [NUL] Command error
The following message appears.
XR;0200,0300,045
∙When the error command is shown, “? (3FH)” appears for codes other than codes 20H to 7FH and A0H to DFH.
87
