| Appendix 3 | Quick Reference for Printing | ||
The table below summarizes the tabs and functions available for the printer. |
| |||
|
|
|
| |
TAB | Function | See Section... | Remarks | |
|
|
|
| |
| Display the printer name. |
| Please refer to the | |
|
|
| user’s manual of | |
General | Type and display the comment. |
| ||
Specify the separator page. |
| your computer. | ||
|
| |||
| Perform the test print. |
|
| |
| Display the printer name. |
| Please refer to the | |
| Specify the output port. |
| user’s manual of | |
Details | Select the printer driver to be used. |
| your computer. | |
Make the timeout settings. |
|
| ||
|
|
| ||
| Make the spool settings. |
|
| |
| Make the port settings. |
|
| |
Color |
|
|
| |
Management |
|
|
| |
|
|
|
| |
| Specify the type of Ribbon Save. | 3.6.1 |
| |
| Select the media sensor to be used. | 3.6.2 |
| |
| Specify an amount of space between labels. | 3.6.3 |
| |
| Specify whether to perform back feed in the Issue | 3.6.4 | The Cutter Module | |
Stock | Mode. | required. | ||
| ||||
|
|
|
| |
| Enable the cutter option and specify a cut interval. | 3.6.4 |
| |
| Specify the print speed. | 3.6.4 |
| |
| Make a fine adjustment (including feed or back | 3.6.5 |
| |
| feed amount and cut position). |
| ||
|
|
| ||
|
|
|
| |
Options | Select the graphics transfer mode. | 3.7.1 |
| |
Adjust print density. | 3.7.2 |
| ||
|
| |||
| Specify a type of ribbon to be used. | 3.8.1 |
| |
| Adjust the Ribbon Motor Voltage. | 3.8.1 |
| |
| Feed labels or tags. | 3.8.1 |
| |
Device Settings | Cut labels or tags. | 3.8.1 | The Cutter Module | |
|
| required. | ||
|
|
| ||
|
|
|
| |
| Perform the test print. | 3.8.2 |
| |
| Check if there is any problem with the print head. | 3.8.2 |
| |
About | View the license information. |
|
| |
| View the printer driver information. |
|
| |
| Make the Sharing Settings. |
| Please refer to the | |
Sharing |
|
| user’s manual of | |
|
|
| your computer. | |
|
|
|
| |
Regional Setting | Select the language to be displayed. |
|
| |
Select the measuring unit. |
|
| ||
|
|
| ||
| Specify the label stock (only Label Size). | 3.3.1 & 3.3.2 |
| |
| Select the orientation (tag rotation). | 3.3.3 |
| |
Page Setup | Specify the number of copies to be printed out. | 3.3.4 |
| |
Specify the User Command. | 3.3.4 |
| ||
|
| |||
| Specify the device lines. (The Line Command is | 3.3.4 |
| |
| used.) |
| ||
|
|
| ||
|
|
|
| |
| Select the dithering pattern. | 3.4.1 |
| |
| Specify tone (RGB). | 3.4.2 |
| |
Graphics | Specify whether to print in color or monochrome. | 3.4.3 |
| |
Perform color registration (alignment). | 3.4.4 |
| ||
|
| |||
| Select the color method (process/spot color) | 3.4.5 |
| |
| Specify the color for the spot color printing. | 3.4.6 |
| |
Bar Fonts | Specifying bar code font settings. | 3.5.1 |
| |
85
