Appendix 5 | System Mode |
A5.5 Test Print
Notes:
∙When pressing the FEED and RESTART keys at the same time
in the Test Print menu, the message returns to “<3> TEST PRINT”.
∙If holding the FEED or RESTART key for 0.5 seconds or longer in the Test Print menu, the key is entered continuously.
∙The fine adjustment parameters are effective for the test print.
∙If any error occurs, an error message appears, and the printer stops printing. After clearing the error, press the PAUSE key to return to the System Mode menu. The printer does not restart printing automatically.
∙A changed parameter becomes enabled by pressing the PAUSE key and is stored in memory until the printer is turned off.
The Test Print menu contains the following:
∙Prints the parameter settings and slant line.
∙Prints the color band patterns.
∙Prints the characters and bar codes.
∙Performs the automatic print out for the assembly process. (Transmissive/Reflective Sensor)
<1>DIAG. V1.0
While pressing the FEED and PAUSE keys at the same time, turn on the printer. Hold both keys until the “<1> DIAG.” message appears. Then press the FEED key twice.
<3>TEST PRINT
The Test Print is ready to be performed. Press the PAUSE key.
Note:
Use the FEED or RESTART key to select a desired value or option.
Note:
When the Transmissive Sensor is selected, the gap between labels should be 2 mm.
Specifying the Print Condition for the Test Print
The print condition for the Test Print should be specified before printing.
PRINT CONDITION
Press the PAUSE key. “ISSUE COUNT” appears. Press the
PAUSE key again. |
|
ISSUE COUNT | 1 |
The number of copies can be selected, with a maximum of 5000 After entering the value, press the PAUSE key.
PRINT SPEED 6"/S
Select the print speed options for the test print: 6 inches/second or 4 inches/second.
After selecting the print speed, press the PAUSE key.
SENSOR TRANS
Select the media sensor to be used for the test print: “TRANS” (Transmissive Sensor), “REFLECT.” (Reflective Sensor) or NONE.
After selecting the media sensor, press the PAUSE key.
101
