USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router manual

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

ifconfig -o eth0 inet 192.168.2.185 broadcast 192.168.255.255 netmask 255.255.00.00 mtu 900

Sets the broadcast address, netmask and mtu for the eth0 interface.

1.5route

Allows the user to add, delete, and change a routing entry or allows the user to get information about an entry.

route add –o -dest <dest_ip_addr> -gateway <gateway_ip_addr> [-netmask mask] [-mtu value] [- hopcount value]

route add –o -dest <dest_ip_addr> -interface if_name [-netmask mask] [-mtu value] [-hopcount value]

route delete –o -dest <dest_ip_addr>

route change –o -dest <dest_ip_addr> -gateway <new_ip_addr> route get –o -dest <dest_ip_addr>

route flush

list routes

route add is used to add a routing entry. The destination address and the gateway to reach this destination address must be specified. The netmask will be computed based upon the class of the destination address if it is not specified. For example, a netmask of 255.255.255.0 will be taken for a destination address of 192.168.3.0 since this is a class C address. If the destination is directly reachable via an interface requiring no intermediary system to act as a gateway, the interface modifier should be specified. The gateway given is the address of this host on the common

file:///P/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (15 of 71) [11/6/2002 8:58:45 AM]