USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router manual Da ipaddress, Dp operatorport

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

-da <ip_address>

Specifies that one of the criteria for a match is the destination address of the IP packet

header. The ip_address must be specified in dot-notation. The prefix_length is used to specify the size of the netmask. The value for prefix_length from 12 to 32.

-sa <ip_address>[/<prefix_length>]

Specifies that one of the criteria for a match is the ource address of the IP packet header. The

ip_address must be specified in dot-notation. The prefix_length is used to specify the size of the netmask. The value for prefix_length from 12 to 32.

-dp [operator]<port>

Specifies that one of the criteria for a match is the destination port of the IP packet header. The port is a numeric value from 0 to 65,531. Optionally an operator may be specified so that many ports can be matched. The operators supported are: <, >, =.

-sp [operator]<port>

Specifies that one of the criteria for a match is the source port of the IP packet header. The port is a numeric value from 0 to 65,531. Optionally, an operator may be specified so that many ports can be matched. The operators supported are: <, >, =.

-tos [operator] <class>

The Type Of Service flag causes the type of service field in the packet header to be marked with the specified value. Based upon this marking, the packet will be given the applicable priority if the transmitting interface has a Queuing mechanism enabled. The class may be any one of the following:

Priority Alternative

Priority

Comment

rt Ef real time traffic ct af1 critical traffic

hi af2 high priority traffic

md af3 medium priority traffic

file:///P/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (44 of 71) [11/6/2002 8:58:45 AM]