USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router manual Setup

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

∙Allows ISPs to provide billing and access control similar to what dial up systems offer.

∙Provides session authentication using either Password Authentication Protocol (PAP) or Challenge Handshake Authentication Protocol (CHAP).

∙Permits router signals to easily negotiate link and network parameters between the router and ISP.

With PPPoA, the router achieves IP routing with Network Address Translation (NAT) for the LAN. The PPPoA-enabled router also supports dynamic IP address assignment to local network nodes. With dynamic assignment, the router acts as a DHCP server.

Setup

1.Open the SureConnect Web User Interface (WUI). This example employs the Web User Interface. You can set up the Network Model with any of the router's three interfaces. The other two interfaces are the Terminal User Interface (TUI) and the Command-Line Interface (CLI). In any case, succeeding steps are similar.

2.Click ADSL Standard. The ADSL Standard Window opens.

3.Select the ADSL protocol that you’ll use. For most users, Multi Mode is the right choice.

4.Click Apply.

file:///P/T_WRITER/Documentation/Released/900...%20(Guiness)%20prac%20template/configexamp.htm (11 of 33) [11/6/2002 9:00:35 AM]